Need Ecu help!!

[fordgt]

Getting no spark!! heaps of fuel.
**1992 Ls400

Coils have got 12v across them

Only gettin .5 of a volt between VC pin and E2 pin think i should be getting 5volts on that pin.

Crank and Cam sensors read around 1.xxx ohms so they should be right?

Ignitors have 12v on centre pin 3 (+B2)

Ecu has power in all the right spots i'm pretty sure

What should i try next...

Ecu part no.

89661-50102
175000-4011 12v
26pin 16pin 22pin 26pin

 

[Lambo]

Hi there, not sure if its the same on an ls400 but on a SC400 the igniter box needs to be mounted to the chassis to get an earth.

Regards
Lambo

 

[striker]

same on a early 4age 16V, run ground wires to anything that requires ground straight from the battery, if that doesn't help something in the parts bin is broken/corrupted.
had that problem in my striker when building it.

grtz Thomas

 

[fordgt]

Hi there, not sure if its the same on an ls400 but on a SC400 the igniter box needs to be mounted to the chassis to get an earth.

Regards
Lambo

Yeh I aleady thought about that making sure they ere earthed.

Kinda thinkin is it worth gettin the ecu fixed or looked at now??
won't be able to try startin the engine for a while coz i'm sendin the flexplate off soon to dellow's

Or to just put a EMS stinger in instead, coz then i can tune it later down the track... are they hard to setup or install anyone running one of theses or recommend anything esle.