How to take the 5mt W58 to pieces

[3barboost]

Hi - I am looking at how to strip the 5mt w58 - anyone have a manual ? or suggestions ?

I need to remove the "lever" to extend it that is in the gearbox at the rear and at the top that connects to the shifter ! I dont wanna strip the whole box and have to deal with springs and levers everywhere - is there an easy way to do this ?

 

[cjsupra90]

Here, this should help. It is pretty simple. Just follow steps 3, 4, and 5. Step 5 continues on the 2nd image

 

[3barboost]

pics not showing

if you are able to please email them to [email protected]

thanks !

 

[cjsupra90]

pics not showing

if you are able to please email them to [email protected]

thanks !

Fixed, but I will email them to you anyway.....

 

[3barboost]

thanks chris !

now to find this restrict pin......

 

[cjsupra90]

Email sent.

The restricter pins are the two large hex heads one the sides of the shifter housing (one on each side). Hard to miss.

 

[3barboost]

I thought those were just to give the spring loading and the lever that feel of firmness - I was looking for a split pin type effort

 

[3barboost]

a gear puller on tailshaft did the trick
a dowel had rusted up badly