3barboost
New Member
- Messages
- 91
- Location
- Johannesburg, South Africa
Help !!! I now need to mate my Toyota 1uzfe V8 alternator to the Miata harness, how do I do this and what wires to splice to what ?
The Miata has 3 wires - Big White which is Batt +
then white with black
and white with green
The Toyota alternator has 4 wires - Big Black which is Batt +
then red with blue
and mustard/yellow (could be green trace)
and beige/white (could be green or blue trace)
I have done the "big wire" so that leaves me with the "two" mazda and "three" toyota wires to hook up ! help !
The Toyota harness was cleaned with a solvent to remove some dirt and while the red wires blue trace is 100% clear the "trace" colours on the other wires is a bit indistinct
The Miata has 3 wires - Big White which is Batt +
then white with black
and white with green
The Toyota alternator has 4 wires - Big Black which is Batt +
then red with blue
and mustard/yellow (could be green trace)
and beige/white (could be green or blue trace)
I have done the "big wire" so that leaves me with the "two" mazda and "three" toyota wires to hook up ! help !
The Toyota harness was cleaned with a solvent to remove some dirt and while the red wires blue trace is 100% clear the "trace" colours on the other wires is a bit indistinct