M msanson New Member Messages 12 Location nz Feb 19, 2005 #1 On the front of the intake chamber is a large vacum port when i start the engine it is drawing full vacum. Could some one please tell me what it is for and what it would normally be attacthed to
On the front of the intake chamber is a large vacum port when i start the engine it is drawing full vacum. Could some one please tell me what it is for and what it would normally be attacthed to
Q qca New Member Messages 119 Location WARWICK QUEENSLAND AUST Feb 21, 2005 #2 (ISC)Idle control valve.
Peewee New Member Messages 2,635 Location Perth, Western Australia Feb 21, 2005 #4 Intake piping, before the throttle body Can see it here http://www.oz-enet.com.au/~peewee/eng_conv_2/finished_bay_4.jpg
Intake piping, before the throttle body Can see it here http://www.oz-enet.com.au/~peewee/eng_conv_2/finished_bay_4.jpg