Parts Complete loom swap for cut + $

[rivmasta]

Hey all,

I purchased an engine from an importer (front sump I think celsior) that came with a complete uncut loom which I dont require.

Am happy to swap complete loom for cut loom (as I need the plugs) with a few $$$ exhange to anyone whos planing on using the OEM ECU.

Cheers,
Riv.

 

[R-Jay]

how much you looking at in terms of dollars on top?
i have a cut crown loom crown ecu (manual conversion). Was going to modify loom and crimp plugs that go directly onto the ecu pins.... but this may be an easier option if i can find a celsior ecu to go with your harness.

 

[rivmasta]

It cost me $200 (importer cost with cut loom is 950, 1150 with complete loom, but it was their last one) so I'll split it and go with cut loom + $100. Sound OK?

I see your in Syd - Im in kings langley if you want to pickup. Pickup the loom that is!

 

[Peewee]

FYI UZS131 Crown knock sensor's have different plugs to the rest of the series.

So if you want to run the factory knock sensors you'll need the correct plugs to go with the sensors. (ie, keep the sensors with the loom you are selling/swapping)

There was a couple of other minor differences, but that was the main one.

 

[hi-lex]

Peewee the crown sensors were the same as a majesta when I swapped mine

 

[hi-lex]

Rjay ,if you do the deal and want to sell the crown ecu pm me as Im looking for a spare for my other hilux

 

[Peewee]

Peewee the crown sensors were the same as a majesta when I swapped mine

Hmm, you 100% sure that the UZS131 crown sensors are identical to the UZS141 crown sensors??

If thats the case then I definitely have a UCF1x Celsior motor, as the sensors were definately different.




Just remembered the other difference, the plugs on the o2 sensors.

 

[hi-lex]

well they plugged in and both motors have run with their orig sensors and swapped ecu/wiring for 12 months now, o2 sensors were the same too, I used an sc400 ecu instead of the majesta jus coz I had it an kept maj as spare

 

[Peewee]

Ok, cool, I must definitely have a UCF10 Celsior motor then...


/hijack.

 

[R-Jay]

Riv, i can take the loom off my engine on the weekend. We can do a swap on sunday if that's ok.

Hi-lex, i'll let you know as soon as i can find a celsior ecu.

 

[rivmasta]

R-Jay - sounds good.

PM about to be sent.