Advice on fitting an M122 to a 1UZFE

[ivan129]

I'm gathering the parts together to fit a M122 blower onto a 1UZFE (non VVTI) engine and hoping there are forum members that can give me some advice. I have a M122 blower from a ford cobra and I'm thinking about using a bullet manifold but thats about as far as I've got so far. Would appreciate any pointers or advice.

Questions I have for the moment:-
what belt length do I use?
Where should I mount the idler pullies?
What diameter pulley should I use on the blower for an intake pressure of 7 - 10psi.
Can anyone sent me some pics of their conversion?

Thanks

 

[BlackUZZ31]

tried searching the site?

 

[4U2QUIK]

I'm kinda interested myself as I have a m122 laying around also. I was planning on making my own manifold and snout extension, but I haven't really had much of a chance to work on it, or do much research yet.

 

[Jakespeeds]

I am getting ready to do this as well. First I need to finish making the adapter to bolt the R154 to the back of the 1U. But then I need to start working on the M122 and get it mounted properly.

Jake