A341E 3 prong fixed yoke

[EXPIG]

Question

I am trying to locate a 4 bolt or similar fixed yoke flat flange to replace the 3 prong on my A341E. This is the last piece to my puzzle

Does the 4 runner or Hilux transfer case fixed yoke flange share the same spline?

I do realise that it may be slightly different in OD and length but this may solve my problem

cheers

EXPIG

 

[Lextreme II]

You might have to cut the 4 bolt yoke to the A341E yoke.


Last few pictures. http://www.lextreme.com/th400.html

 

[EXPIG]

I was thinking more along the lines of this part

 

[Lextreme II]

I think you need to cut and weld the yoke.

 

[EXPIG]

looks like it may be my only solution, would be good if the 4 runner item has the same spline though