J jmswltn Member Dec 18, 2013 #1 is there anyway to monitor ignition advance with the stock 1uzfe computer? i have seen someone use a camera, timing light and a zip ties but i was hoping for a little less crude approach
is there anyway to monitor ignition advance with the stock 1uzfe computer? i have seen someone use a camera, timing light and a zip ties but i was hoping for a little less crude approach
G gloverman Well-Known Member Dec 18, 2013 #2 Use a scan tool and monitor the live data. Timing light on a dyno. Ossilloscope with two channels using one cam trigger and the ignitor trigger.
Use a scan tool and monitor the live data. Timing light on a dyno. Ossilloscope with two channels using one cam trigger and the ignitor trigger.
J jmswltn Member Dec 18, 2013 #3 i dont have a scan tool, scope, or a dyno. i did try this: http://primavistalab.com/myengine/ but cant get it to connect to the diagnostic port
i dont have a scan tool, scope, or a dyno. i did try this: http://primavistalab.com/myengine/ but cant get it to connect to the diagnostic port
