Recent content by ToyMG

You sir are my new best friend thank you very much:)

Hey I was wondering if anyone on here with hi tex marine manifolds could measure the over all width of the engine. I would love to put a 1uz vvti in my boat but I can only go about 15cm wider than my current Chev engine or it won't fit in the cowl and Im not cutting up my boat. Thank you very...

actually the drivability issues were unrelated I found that the crank position sensor was cracked. New one fixed that olddly enough the ecm wasn't throwing a code for that. So yeah it just got rid of the tranny codes

thanks peewee helped alot no more trans codes just speed sensor and egr to contend with now. Why would my obd 2 ecm not though a code for down stream o2s I'm not complainning since I don't have them and will save $400 not putting them in. Maybe I just didn't warm it up enough. dunno anyway...

Thanks I got one off of ebay for $58 but thanks anyway.

I need a crank sensor for a 95 + ls 400 please pm

I searched and read for about 6 hours now and thats just tonight. I 'm getting mixed results on running an obd II ecm (from a 96 ls400) with no auto. I have a 1uzfe in my hilux with a r150 trans. it starts idles and runs like a top. the only codes it gives me are for the trans solenoids. but...

I'll give it a go but I was playing with it tonight and it seems to be retarding the timing 30 degrees at 2500 rpm my igniters pluged in but I didn't know if I grabed the wrong ones. the wrecker had several ls400 and mine is obdII. I'm getting very frustrated.

what igniters were you given and model/year donor having similar probs with 95 ls400 however I wired it myself and have no one else to blame.

I'm jealous..... what was in a 79 cressida for an engine oem? All the old toyotas here are rusted away...only a coulpe 80's celicas/ supras left.. no coronas or cressiadas or anything cool.

older (pre 92) hondas run lines into cab fuel and brake but not rubber

looks like the newer style hot wire afm from, a 95-97 ls 400 will work same as my plug

Hey guys I need the plastic cover that goes over the spark plug wires on the 1uz don't care if there toyota or lexus had a small fire ,ok no engine fire is a small fire, last parts I need. In Canada or north eastern US would be great Thanks Blaine

on a side note avgas will lean the mixture slightly because it has anti-freeze in it. I run my personal watercraft on av gas 830cc, 2 stroke, 225psi cranking compression, 170hp I was a long time tunning it.

will a 94 harness work on my 95 ls400 engine I foung a high km ls400 engine built the 10th month of 93 and I have a 95 engine ecu and airflow meter but since I had a small engine fire I need most the wiring harnes a new HACV and a couple of new injectors I found a cheap complete engine would...