Recent content by poweredby1uz

Where did you get your flywheel done?

its just for test fitting and trying things out on. Doesn't matter if it dead. needs to be cheap and in the uk.

ruishy what you been doing to the gypsies :D I'm be interested in the turbos and wastegates if its not sold and you want to keep the pipe work? let me know dude.

Change the intake manifold it sits pretty high :)

ruishy1 I see you brought the kit in that link. I don't understand how you control the VNT is it just a actuator?

For what I'm going to need psi/bar wise I think it will be ok. I think I'll get a set on cams in there and play with the heads a little. I will also have a different intake and exhaust manifold to stock as I feel they aren't the best design and would need alot of reshaping :( If all else fails...

This was What I was going by :) http://www.mkivsupra.net/vbb/showthread.php?257801-1UZFE-Twin-Turbo-Conversion-Kit-for-Supra

I was going for 2 Gt28s as going by the guy at 2bar tuning claiming the 28rs will hit 750bhp not the vnt25 hits 550bhp with 600+ tq 28s are cheap and my gearbox won't take over 600hp plus I think it would be to fast to drive :D

I wonder if the SR cross member/rack is the same as the KA. I think Its just going to take a big hammer to the tunnel when I get some free time :)

Yeah I made my own but I have changed them 3 times I have now built a second set that use a custom mount between the front cross member and stock ls400 lexus mount swaped left to right and vice versa just to play with the height. I'm don't know what bell housing/box you used but I have the...

I wish I could get my 1uz to sit that low. Mine hits the steering rack :( Looks a good build tho I like the red body and matching engine :)

same as above? Do you have any pics?

How do you work out compression ratio? ie if the shock gasket is 0.059 with a 10:1 ratio what would 0.049(1.25mm) head gasket make it?

I've never done anything with cad I have design software but never used it :( Its something I'm meaning to look into as could be really helpful. No one seems to like the 1uz in the uk so parts and knowledge are slim on the ground we do have a lot of engines kicking about tho :) My plan was to...

$500 woww that seems a lot :O I asked autronic if I could see the cad plans. I did have the same thoughts xr8tt about adding them on at a later date. Its hard to get a set made in the uk as all the shops want a min order normally 10+ Is it possible to to use the early 1uz stronger...