Flywheel dimensions

[BossEng]

Currently in talks with a few guys in the UK that manufacture flywheels, initially i'll be having a one off made, but they are happy do batch's, no minimum ammount required,

i currently have a modified 3SGTE that i re-machined the PCD on ( not slotted - actually redone the PCD )

but i am not too happy with the setup and will be using it for testing purposes only, i am using ARP's but i have to retain the flexplate spacer,

so i want to keep the 3SGTE clutch and pressure plate,

anyway, to the point, has anyone got a decent drawing of the 3SGTE flywheel, or one suited to the 1U that doesnt require the spacer plate, or if it doesnt i can edit it in,

also, if 4U2QUIK reads this, could you please PM or email me? i've been trying to get ahold of you RE: flywheels!

 

[camaro68]

Call me on 07879 815368 here in the UK may be able to help.

 

[4U2QUIK]

3vz flywheel does not use the spacer, and it uses the 3sgte pressure plate.
and....
the bolt hole pattern barely gets moved out in comparison to the 3sgte flywheel
hope this helps!

 

[4U2QUIK]

and more specifically, you mill the holes at 1.575R Pattern and you turn the back off to .100" back from the ring gear.