Parts Stripping 1uzfe - non vvti non interference - Aus

[ALI1UZLUX]

************************
Stripping 1uzfe block, early non vvti non interference type

For sale: All parts ie; cams, cam gears, distributors, intake - upper and lower,
injectors, throttle body, heads, rods, pistons, loggs (celsior), sensors, plastics, etc

******NO SUMP*****
******NO ECU******
******NO LOOM*****
******NO CAS******
******NO ALT******
******NO PS*******

Item Condition: Good - Excellent
Price and price conditions: make an offer
Extra info: Keeping bare block.
Pictures: Supplied on request
Contact Details: PM or here
Location: Brisbane Australia
Delivery & Conditions of Delivery: All states - Aus, if overseas buyer to arrange.
************************

 

[-Nemesis-]

Hi mate, do you happen to have the fan pulley set up? The non hydraulic style...

 

[BigEv]

do you still have the dip stick??

Evan

 

[ALI1UZLUX]

Hi mate, do you happen to have the fan pulley set up? The non hydraulic style...

no sorry.

do you still have the dip stick??

Evan

no dip stick.

 

[ranger2339]

Do you have the rubber motor mount parts? Fuel line that comes from the rail and the hoses for the hydro fan set up?

Thanks
Josh

 

[tango]

let me know how much you want want for the heads (complete) and the power steer pump

 

[ALI1UZLUX]

Do you have the rubber motor mount parts? Fuel line that comes from the rail and the hoses for the hydro fan set up?

Thanks
Josh

rubber motor mount & fuel line from rail - nope sorry.
have one main hydro fan line, the bango fitting one off the block
- make an offer

let me know how much you want want for the heads (complete) and the power steer pump

No PS pump sorry.
Heads complete still available - Make an offer.

 

[ALI1UZLUX]

also have a front sump - pan only.

 

[Tommyk]

Gday mate, have you got the oil pump?

 

[ALI1UZLUX]

Hmm, when you say oil pump, do you mean the hydrolic fan pump, or the crank driven engine oil pump? Have both...

 

[nogrip]

Do you still have the rods?
If so how much for them?
Thanks

 

[ALI1UZLUX]

Do you still have the rods?
If so how much for them?
Thanks

Yes, still have the rods, $50 and their yours.

 

[nogrip]

Great Consider them sold.
Pm Me your details, and I'll Call tomorrow to organise payment and freight.
Thanks

 

[ALI1UZLUX]

Great Consider them sold.
Pm Me your details, and I'll Call tomorrow to organise payment and freight.
Thanks

nogrip, I tried to send you a pm but it said this

nogrip has chosen not to receive private messages or may not be allowed to receive private messages

can you PM me

 

[rx7 s1 1uz]

are the pistons and rods still avaliable if so how much for both including shipping to auckland in new zealand?

 

[coop-77]

how much for the heads mate

 

[XT-1]

how much for the toyota logo and word toyota on the intake (the one thats mounted to the square plate on top of the intake... I need the plate an logo please)

 

[hrforever]

After a right hand side rocker cover (drivers side).

 

[willhickey]

how much for the oil level sensor unit? email me at [email protected] i dont get on here alot thanks will