r154 adapter

[oneeyefrail]

Ok people hopefully someone can help me here, looking into making an adapter for between the r154 box and the 1uzfe,basically coming off the standard 1uzfe (ls400) bellhousing ,can any one tell me the correct thickness this adapter has to be?cheers in advance

 

[V8_IS200_marcus]

Hi there, im sure it has to be 30mm, as im about to make one as well, and thats how thick im makeing my one

 

[cebby]

Is there a drawing floating around for this? (I'm assuming the the R151F is the same pattern) Thanks!