Wanted Plenum Chamber for 1UZFE

[ivan129]

Hi, I'm after a plemum chamber for a 1UZFE. The plenum is the part that the throttle body bolts to and sits over the top of the engine. If someone has one in Australia they wish to sell please call me (0417399954) or PM me. Located in SE suburbs of Melb. I want to machine one open and see if I can improve the flow characteristics of it.

 

[JustenGT8]

Not much you can do in there and little point as it's the bottom section that needs all the work

power port the bottom runners and you'll see gains....expensive though

PS i have one, what ya offering?

 

[ivan129]

Plenum

Thanks for your reply. I have already ported the lower part of the intake runners. I also want to move the TB from the RH side to the front of the plenum so my Coil Near plug set up looks a little neater. If you want me to make an offer then... $40 and I'll pick it up if you are somewhere close to Rowville. In any case give me a call so we can chat about engine mods

 

[V8Datto]

If you don't get Justin's manifold, I have one.

and I'm near Rowville.

 

[JustenGT8]

It's all yours, his, whatever

 

[V8Datto]