Brand New Injectors

[Lextreme II]

I just got these injectors from my friend for a member and these injectors look mighty nice.

 

[V8_IS200_marcus]

How much ?? if thats ok to ask!

 

[Lextreme II]

LOL of course.... They are $295 plus $10 shipping. Good for 12-14 psi. They are direct bolt on and the proper impedance too. Once again these are brand new unopen.

 

[SC400TT]

I need 1000 CC to fit the stock rail, and proper impedance...

Ryan

 

[Lextreme II]

Good luck with that Ryan. I think the biggest is 850 but I think your stock rails might be too restricted for that. Perhaps u should consider WoflKatz fuel rails. Or you can bore out the stock rails. But the way, you have standalone so impedance doesn't really matter.

 

[rms]

David,
I need a set of 350-450cc injectors for 1uz rail, impedance does not matter but std electrical connector must fit.
Can you supply ?

 

[Lextreme II]

Yes... PM me....

 

[cribbj]

David, I'd also be interested in a set of those with the same capacities Erol mentioned.

 

[V8_IS200_marcus]

LOL of course.... They are $295 plus $10 shipping. Good for 12-14 psi. They are direct bolt on and the proper impedance too. Once again these are brand new unopen.

Thats a good price......onder: what cc are they ??

 

[Lextreme II]

Gents,

Got the info and I am not sure you guys are interested or not. They quoted my $35 each low impendance and shipping. They are Supra 7MGTE 440 or so cc/min. They are TYPE E plug instead of Type F. However, this place stated that they will cut the groove so it will directly bolt on like this article. http://www.lextreme.com/1uzfe-injector-upgrade.html FYI, these are rebuild not brand new. I this guy said he have few thousand of these injectors.


The price is from the injector shop. No mark up at all.

david

 

[V8_IS200_marcus]

Gents,

Got the info and I am not sure you guys are interested or not. They quoted my $35 each low impendance and shipping. They are Supra 7MGTE 440 or so cc/min. They are TYPE E plug instead of Type F. However, this place stated that they will cut the groove so it will directly bolt on like this article. http://www.lextreme.com/1uzfe-injector-upgrade.html FYI, these are rebuild not brand new. I this guy said he have few thousand of these injectors.


The price is from the injector shop. No mark up at all.

david

so at the end of the day.... he will make them so they are plug and play!!

 

[Lextreme II]

Yes..... that is right. So they will plug right on.