3UZ IN TO A SC400

The 1UZFE EGR Delete Kit is available for sale here.

Cosmi

New Member
Messages
5
Hello guys I'm planning to put a 3uzvvti in my soarer
I bought a 3uz from a ls430 with ecu ghearbox harness pedal shifter
My question is anyone done this before????
How you make your dashboard to work with the 3uz ecu???
 
first of all , you need to get rid of immobilizer to get the engine running
next thing, dash. Depends on soarer gen
 
first of all , you need to get rid of immobilizer to get the engine running
next thing, dash. Depends on soarer gen
I have taken out the immobiliser out from the ecu
The main thing is the dash and how to wire the bastard to work properly
 
ok so all analogue one
screw 1989-1996 water temp sender in place of stub and connect to dash
Wire rpm counter directly to ecu and if no luck, use tachometer amplifier
Use speed signal converter available from me
wire a/t shifter indication lights directly to shifter
 
ok so all analogue one
screw 1989-1996 water temp sender in place of stub and connect to dash
Wire rpm counter directly to ecu and if no luck, use tachometer amplifier
Use speed signal converter available from me
wire a/t shifter indication lights directly to shifter
Thanks for your reply have you done this yourself???
Can I buy instructions on what wire to connect where???
 


Top