C
cowboy bebop
Guest
My goal is to have a forced induction motor capable of 4 digit HP. Read as over 1000 rwhp, so the iron block of the 2uz-fe looks to be as stout as I would need. After reading over and over again the threads in this VERY informative forum, I am left with a few questions.
...Can the 2uz harness plug directly into the AEM ECU?
...In educated opinions, how much HP can the 2 bolt mains handle with ARP studs, and what can be done to reinforce them besides the 4 bolt conversion?
...What forged pistons, and rods are available for the 2uz-fe without having to mod the crank?
...Can the 2uz-fe use the same flywheel as a 2jz-GTE?
...Are there aftermarket cams for the 2uz-fe as there are for the 1uz?
...Can the MKIV Supra valve springs, retainers, and valves be made to work witht the 2uz-fe?
My present 2jz-gte runs 25psi minimum on the street with a GT4788mm, can the 2uz-fe be made to handle that sort of manifold pressure with dual GT35Rs? I know that some of these answers are scattered across the forums, but it would be helpful to have them at one place. For those who are wondering, I'm perfectly serious in these questions, and have built the 2jz-gte as far as it will go.
Thanks guys,
Eric
...Can the 2uz harness plug directly into the AEM ECU?
...In educated opinions, how much HP can the 2 bolt mains handle with ARP studs, and what can be done to reinforce them besides the 4 bolt conversion?
...What forged pistons, and rods are available for the 2uz-fe without having to mod the crank?
...Can the 2uz-fe use the same flywheel as a 2jz-GTE?
...Are there aftermarket cams for the 2uz-fe as there are for the 1uz?
...Can the MKIV Supra valve springs, retainers, and valves be made to work witht the 2uz-fe?
My present 2jz-gte runs 25psi minimum on the street with a GT4788mm, can the 2uz-fe be made to handle that sort of manifold pressure with dual GT35Rs? I know that some of these answers are scattered across the forums, but it would be helpful to have them at one place. For those who are wondering, I'm perfectly serious in these questions, and have built the 2jz-gte as far as it will go.
Thanks guys,
Eric