dulobast25
New Member
- Messages
- 91
- Location
- spring valley, ca 91977
Anyone make a set of mounts to mate the 1uz to the 1st or 2nd ghen 4 runner v6 mount locations? I dont have a wlder or anything like that, And thisis where my project will likely get stopped. Ive had my 4runner for 4 years without a motor and I want to get it started. I'm running the r151 tranny, phil bradshaw adapter, 1uz un clocked bell, 3vz cluitch and pressure plate, and I want to keep the tranny in the stock location. I would prefer to keep the truck stock from the tranny forwaqd without cuilding or cuttign new driveshafts, moutn brackets etc. The truck is an 1988 4runner 4x4. I want to keep it 4x4. Once I get th engine dropped in i'm golden. SOmeone help me ouit. If you have these or have the pattersn, let me know. Even if you have a set you didn't use I masy be ablet o use them, mark the locations and maybe take it to a muffler shop to have it welded, etc.