1uz 80 series auto

[mick 490]

Hi guys all info has been very handy. Am looking for a fan idler and pully to replace the hydraulic pump on my 1uzfe any help would be good, dont care if it is 2nd hand

 

[gloverman]

http://www.lextreme.com/forums/showthread.php?t=15715&highlight=hydraulic+pump

heres a guy that needs to swap. Do you have it all running like it should be?

 

[mick 490]

pulled guts out of hyd pump to try and use it as an idler but not working. dont have hyd fan as am using ba falcon tiwn thermos

 

[gloverman]

He only needs it as a cover for the cambelt. He is also deleting the hydropump. Cheers

 

[mick 490]

will a fan idler for a ls 400 fit the soarer 1uz-fe , also will a plug , lead ,dizzy cap and roter button for ls 400 fit the same engine

 

[gloverman]

The fan idler and hydraulic fan pump units will interchange from 1989 through until 97/98 until they went to the VVti engine. VVti engine fan idlers can be made to fit with a small modifaction but are not a direct bolt on. There are a few different solenoids. Dizzy Caps , rotors and spark plug leads are the same except the LH coil lead is different from Gen 1 to gen 2 due to the changed position of the coil. Spark plugs change but there are a couple of different part numbers as on model of soarer runs a smaller gap.

 

[mick 490]

thanks for the info con modify pully to mate to fan idler . will check plug numbers be for i buy