1gzfe wiring

[steve34tudor]

G'day All
I'm looking for a wiring diagram/pin outs for my 1gzfe please

 

[4AM_Engineering]

Any specific requests or just harness pinout? I have the paper electrical manual & the service manual.

 

[steve34tudor]

Any specific requests or just harness pinout? I have the paper electrical manual & the service manual.

thanks for the reply
I'm fitting the v12 into a 1949 Ford ute
Ive been using the 1uzfe in quite a few hot rod projects, so the v12 is a progression
Ive always used the toyota computers and im very happy with the reliability, performance and fuel consumption.
(my '34 ford recently ticked over 70,000 k's)
The v12 engine came complete with all wiring, computers, 6 speed auto etc.
I have since sourced a FBW throttle and security module
So i'm very keen to use all of the factory gear
So yes, I need a wiring diagram and the service manual would be helpful

 

[361UZ]

Hi Steve.
No help (sorry) but will this be a project you can post progress on here?
Something for us all to look forward to!
Whereabouts are you?

 

[steve34tudor]

Hi Steve.
No help (sorry) but will this be a project you can post progress on here?
Something for us all to look forward to!
Whereabouts are you?

i sure will if i can get some wiring diagrams lol
I'm in Hobart

 

[steve34tudor]

thanks for the reply
I'm fitting the v12 into a 1949 Ford ute
Ive been using the 1uzfe in quite a few hot rod projects, so the v12 is a progression
Ive always used the toyota computers and im very happy with the reliability, performance and fuel consumption.
(my '34 ford recently ticked over 70,000 k's)
The v12 engine came complete with all wiring, computers, 6 speed auto etc.
I have since sourced a FBW throttle and security module
So i'm very keen to use all of the factory gear
So yes, I need a wiring diagram and the service manual would be helpful

G'day

wondering if you want to part with the manuals
or may be copies

 

[Speedy's_6]

wondering if you want to part with the manuals
or may be copies

G'day, you can buy these manuals online.

2004 Toyota Century 1gzfe Workshop Service Repair Manual

2004 Toyota Century 1gzfe Workshop Service Repair Manual This is a COMPLETE troubleshooting/ Workshop Manual for Car 2004 Toyota Century Workshop troubleshooting Manual in PDF format. These are the same for manuals given to official dealer's workshops, they contain detailed instructions and...

www.reliable-store.com

hope this helps.

 

[StockSC300]

Dont buy that link above^^^ it is a scam as I purchased it and they never sent any link

 

[Speedy's_6]

thank... I didn't know... I only found it when searching for one, myself.

 

[pjwunsch]

Let me know what circuits you need to see and I'll post them

 

[George_R]

there were at least 4 types of 1gz pinouts
be more specific
start with ecu part code

 

[AnthonyH]

Let me know what circuits you need to see and I'll post them
View attachment 25766

 

[AnthonyH]

Let me know what circuits you need to see and I'll post them
View attachment 25766

Hi, may I ask if this manual also covers the 6 speed AT 1GZ-FE (2010+).

I'm looking to purchase this manual as well, but reluctant as I worry it may not cover the 6speed engine which I have.

Cheers,
Tony.

 

[AnthonyH]

Hi, may I ask if this manual also covers the 6 speed AT 1GZ-FE (2010+).

I'm looking to purchase this manual as well, but reluctant as I worry it may not cover the 6speed engine which I have.

Cheers,
Tony.

ECU numbers 89661-40260 & 89661-40270

 

[AnthonyH]

Let me know what circuits you need to see and I'll post them
View attachment 25766

Hi, if anyone is looking to purchase this manual, it's very informative. However it doesn't DBA-GZG50 chassis (engine, transmission and secondary air injection), there may be common areas, however the engine loom differs.