power steering pump

Thought this would be a good one to share from Kelvin. @gloverman

Hi all I guys this had been posted before so sorry if going over old ground. I have a 1uzfe in a LN130 surf with with cross over steering and solid axle swap on leaf springs. My question is I was looking on lowrange offroad and wanted the uprated steering pump to give 1650psi and 4.5 gal per...

Hello everyone, I have discovered that I don't need my power steering pump and of course I'm not going to have AC in my current 1UZFE Build. I have the belt number that I need if I were going to use the power steering and no AC, but I'm now deleting my power steering pump as well. I'm fairly...

this is going in a toyota 4runner and was wonder what size everyone has use for the power steering line??. i have a steel braides SS 3/8 hose with 6AN and doesnt seem to work.. im using an Ls400 pump with the resevoire remotley like the SC400.. i didnt use the banjo bolt and decided to get a 90...

Here's a question , is the Lexus power steering pump good enough for the heavy weight of a 4WD , the Lexus pump usually operates a rack and pinion but I'm using a big clunky steering box . I'm thinking of getting the matching Mitsi pump and installing it in place of the 1UZ one , or am I wasting...

My '98 LS400 210,000km, full Lexus service history until 175,000km when I bought it.. When you put a screwdriver on the power steering pump and up to your ear you can hear quite distinctly a ZZZZZZZZZZZZZZZ sound and at idle, a faint thump----------thump---------thump that you can just feel...

I have 3 brand new original from Toyota SC400 PS pumps. PM me for price and shipping.

Hi, I'm hoping someone could give me some guidance on how to plumb in 1UZFE power steering pump. I am doing an engine swap fitting a 1UZFE into a Nissan. I'm after a plumbing diagram that shows me how the pipes route from the 1UZFE power steering pump. I have removed the resevoir from the...

It is leaking around the pump, does the fluid actually run through the bracket, I just got it all backtogether from replacing the timing belt, took me 3 months to do LOL. but the geniuses that took it apart took all the bolts out and I dont have any of them, I have 3 bolts in it but I think its...

Hi All, Starting to look at the engine for my car, there'll be very minor mods to it just to get the thing up and running. Firstly I'm getting rid of the power steering as I'm not using it in the car but the a/c stays, so I end up with a belt routing like this: Now the tensioner is rotating...

hopefully this is the correct section..my appolgies to lovely hard working moderators if it is not...(here or swap,here or swap?) anyway, has anyone info on how to move the power steering pump?has anyone had to move it? if so where to (no ,not to the scrap bin) and how did you fabricate up the...

k i'm having a problem with power steering. I had found a leak on the high pressure hose, so I replaced with the one on my parts car. Well now i bled it and everything but still is hard what am i doing wrong???? the way i did it: step 1. take high pressure hose off pump and rack step 2. put...

As topic :)

I'm putting a 1UZ in a Mercedes 280SE and I'm wondering if anyone knows what sort of pressure the 1UZ hydraulic fan pump runs at on 100% duty cycle. I've got a crazy idea that involves running the 280SE self levelling suspension off it.

Hey all, Im running the stock pump, modified for a much larger, baffled resevoir. Does anyone know what PSI and flow rates they run at? Also, is there a recommeded grade oil? or off the shelf whatever is fine for sustained revs? My system is: stock pump (may go for smaller pulley to...

My stock power steering pump has to make way for turbo manifolds. After toying with the idea of installing a 12V electric pump I decided to go with the hydraulic pump which powered the hydraulic radiator fan in the JDM SC400 the engine came out of. Unfortunately, several months ago I had...

I started using my old 1994 LS400 with only 40tmiles. I have this leak under the power steering pump. I changed the vaccum control valve but its still leaking. Im afraid to bypass the valve because it might affect the idle and another part. Please help!!!!!!!!!!!!!

looking for the size and pitch of this nut. Tried a 12mm 1.25, 1.5 and 1.75 with no luck. Want to chase the threads but would like to know the correct size. Exploded parts diagram would be really appreciated. Cheers

Anyone considering reconditioning their own power steering pump on their 1UZ, please read on..... I've just stripped the pump on my 1UZ, had all the parts chromed and polished and ready to assemble. I took the changeable parts (bearing, oil seal, o rings etc) down to my local bearing shop and...

Those of you who own a first generation Lexus (90-94) with mileage over 100k bound to experience power steering leaks (if not already). Usually, the valve is the culprit (due to heat)... replacing the pump (and valve) will fix the leak temporarily (it WILL leak again). One solution is to bypass...