oil cooling

Been investigating the engine oil and its pressure Vs temps. Until today, I have the standard small oil filter (Ryco Z418) and 10w30 oil. The main issue was the idling pressure that would sit around 16PSI when the water temp was 90+Cdeg. When cruising at around 2600rpm, pressure was 67psi...

I am not happy with the oil temperature on my 1UZ: I have a relatively big Monster radiator with two powerful Bosch thermostat controlled fans. I am using the red anti freeze fluid in black plastic cans, Toyota pre mixed coolant. There is between 10 and 11 liters of coolant in the system...

Just finished up turboing my sc400, oil temps are 240 after a spirited drive. So I ordered all my stuff to plumb a 25row setrab oil cooler. I want to keep it on the driver side however my p/s cooler and bov are limiting my space on the driver side of the bumper. I was tossing around the idea of...

Hey guys so i have pull the front end of the truck apart to change fan belt and some general tidy ups as its been sitting under a tree for the last few months and noticed that the oil cooler was setup in a way i wasnt familiar with. opened the connections and it was still brand new inside...

Just built a hybrid 4.7 I call the 1.5uzfe, with a raised stall speed, expecting 9psi of boost on an ATI Procharger and expect 350RWHP-375RWHP on my stock R341E tranny and need to know if it's possible to run a T-cooler that's too large. I am getting ready to rebuild mine as it's got 210,000...

I was assembling the built V8 tonight and I was thinking if it's possible to optimize the cooling system a little. Looking at the engine it seems the front is better cooled than the rear (like most engines) so that can be improved. How about anything else? Are there any hotspots in the heads or...

What do u guys think of this setup for remote and low mount. Assume the reservior tank is 4" x 12". That should hold about 4-5 quarts along with oil cooler and other lines add up about 6-7 quarts. Would this system allow enough cooling?

Dear All, I am looking for an oil cooler adaptor kit. this adaptor should be installed between the oil filter base on the block and the removable oil filter. The kit got 2 outlets for the oil hoses that will lead the oil to and from the oil cooler. Any idea where to get one? Thanks Guy.

Anyone know what is the medium oil temperature during a moderately boost car? I got some heavy duty industry oil return line. I wonder if they can with stand the heat. They are high temp rated.

Ok, time to brainstorm guys. I've a '94 Toyota 4Runner which now sports a 1UZFE engine. I'm using the existing radiator off the V6 for the time being, but occasionally the engine runs warm. It was bad last week, which I traced to an airlock, which solved it mostly. It ram a little warm today...

I am thinking about getting one but i would like to get some feedback on the plumbing of it. From where and to where?