Search results

Thanks Peewee and Chrisman, Problem solved (I hope) When I restarted the car with the battery disconnected for 3 weeks (away with work) It played-up immediately stopped about 10 times in 15 minutes I was running my hand around the wiring loom looking for kinks and breaks and found that the...

I have driven my 1934 Ford street rod for some 5,00kms including to the Australian Street Rod Nationals in Queensland. Draged it, Skid pan and circuit raced with out a hick-up. During the last 2 days of the journey it began to fault. While crusing along, say 1000 rpm, the engine quits (as if...

Hi lambo Yes, it appeared and tasted like baking soda and acted like grit blast. It is all that is permitted around the slipways in Tasmania for vessel blasting now I wouldn't recommend salt as you would be impregnating the ally and steel work with salt (and then rust) It certainly cleaned...

Hope this helps guys I stripped mine down leaving on the heads, sump and transmission Made up some alloy plates for the intake and exhaust ports and other orifaces Had the lot soda blasted and then coated it with Jotun/Imperite 300/303 clear epoxy the bolt ons that weren't chromeable or...

Thanks Sideshow Thats all helpful info My "Classic" speedo is electric so I can screw the crown sender off it and attach yours I'm not worried about the error codes. Can you give me some mailing details and we'll get underway or if you prefere my E mails is [email protected] I won't get...

Thanks Sideshow Just to get my mind straight. I currently have all fittings on the transmission and the wires up to the dash. (I take it yours is a different sender) As I'm not using the Crown dash the wires from the rear most drive terminate in large plugs going no where. As there is no...

Guts, thank you, I'll have a play with the throttle position sensor. Quadcam, yes I built it myself over a 2 year period. Stainless Independant all round Nissan 300zx diff centre and hubs and my control arms and obviously a Quadcam Sideshow, How do I go about purchasing one from you, please...

My '34 tudor has just made its way to the trimmers in Victoria (500ks) plus overnight ferry crossing from Tasmania The rod ran faultlessly on the trip puring along at 2000rpm at 120 kph with a few problems before leaving. (1) On start up it goes straight to idle, No high idle and back to norm...

Thanks All The paint is a combination of old digital camera and Mercury vapour lighting on a dark day. Its WRX blue I'll post some more pics as the panels go on And with some more help to sort out the transmission regards

Thanks 34 Ford They all look the same without the grille on

Thanks Peewee I take it that both of the plugs, either side of the outer butterfly can be removed only leaving the throtle position sensor on the inner butterfly. Whats the TSRM please regards Steve

Is it correct that the outer butterfly in the throttle body is the traction control? Does it serve any other purpose? In other words can I disconnect the wiring and remove it. I removed the throttle position sensors to clean the body and marked them accurately, do they have to be readjusted...