Search results

What size turbos do you think they would use? Obviously a factory street car would need a lot of response as turbo lag is not desirable. BMW Engine size 4.4L Just a bit bigger than a 1uz, The TT 4.4L BMW X5 M comes with a pair of Garrett Turbos the model is MGT2260SDL and it looks like...

Looking for Educated opinions on the following.. Chassis 1997 240sx.. with original 2.4L motor the car weighs 2880 lbs Im debating wether to do an F20c (Honda S2000 Engine) or 1uz with Automatic. my guesstimate is a turbo f20c in that chassis would be around the same weight as a stock s14 with...

Im looking into getting a 91 1uz for a TT setup now Im not new to Motors or turbos. currently I have a 580rwhp 1jz. Im hoping to get 600+ out of the 1uz, I figure if the compression is lowered to around 9:1 and I use ARP bolts in the rods and keep RPMS under 6200 it SHOULD hold that much power...

Look at the first reply to this thread http://www.soarerworld.com/forum/showthread.php?t=27183 That guy claims the a/c is ran off the ecu. So will I be losing Air conditioning by running a Haltech e6k?

Just want to hear your Opinions but I can get a 2001 540i for a good price. it comes with a 4.4L v8 the M62B44 282hp 310tq and a 6 speed. these are ok motors. aftermarket support is not as good as the 1uz. Do you think it would be a good Idea to put in the smaller 1uz-fe and a supercharger? Im...

I was looking at the FIv8 registry and the numbers are all over the place. I currently have a Haltech e6k standalone that I will use.+ a good tuner. Now, if I get a 1st gen 1uz and an r154 tranny. and an m90 or m112 (yes I know they are different) what can I realistically expect on a non...

How in the world do you accomplish this? I noticed on Ford Lightings the IC is INSIDE the plenum with water running through it. how could one adapt a FMIC onto somethign like a m112 1uz? I head thunderbirds have an intercooler with the m90 but google images have failed me.

If you are how did you go about doing your manifolds? I was considering reversing some ebay Tundra headers, but worried about losing a/c

I found one of your old threads where you reversed Tundra headers.. http://www.lextreme.com/forums/showpost.php?p=20345&postcount=50 do you have pics of the other side, I want to see if the a/c compressor clears. I definitely need a/c in Florida. Do you have pics?

I have been looking at pics of the underside of sc's and GS's and I cant see HOW you can fit a downpipe (or two) under there. if someone does something like this.. how is there room for the downpipe to mate up to the exhaust without being directly below the oil pan and tranny which would...

Should I be worried about the connecting rods folding at that level? they look really thin from all the pics online, but they should be fine right? its going to be a 99' Gs400 63mm turbo FMU 42 lb injectors and a walboro.

Maintaining the stock redline on the pre 95 1uz motors, how much power have you guys seen the stock longblock handle at the wheels with proper tuning on 93 octane? How much tq can the trans hold with two good coolers? and by any chance can the Supra A340e bolt up to the 1uz block? Injectors-...