Search results

  1. P

    300-350rwhp

    Can a eaton M112 or M90 get a SC400 to 300-350rwhp. Or should I just go with a single T60-T61 with low boost. Either way compression will be Lowered with ross pistons. Friend keeps telling me to keep it simple because the 1UZ's computer controls to many things on the car. My main goal is to be...
  2. P

    Hard Steering

    Does anyone have a part number for the solenoid for the PS rack? Could the dealership and they wanted $943.40 for a solenoid :wtf: and I told them I will call them another time:eek1: I bled the pump and there was definately alot of air in there but we did a test on the PS rack to check to see...
  3. P

    Hard Steering

    Yes I did search. Cant get a definate answer. I rebuilt my power steering pump about a month ago becaus it was leaking and killed my alternator. Replaced alt and rebuilt pump with gasket set from toyota. After putting it all back together and bleeding the heck out of the system I finally had...
  4. P

    Twins?

    Still cant decide on twins that are not Garrett GT series. The price of the garretts are hard to swallow for an intial setup? Looking to be economical, Maybe master power or Holset. Or ebay turbos I just need to know the specs of twin. Straight t04 will fit in the SC400 you think? Or a T3/t4...
  5. P

    A 1uz-fe - V160 clutch for everyone! We're in business now...

    Cowboy, What clutch would you reccomend for not breaking the bank and holding atleast 500-550rwhp in the V160? Cant seem to find one?:shrug:
  6. P

    A 1uz-fe - V160 clutch for everyone! We're in business now...

    Price list for the clutches ans custom work would be awesome? Is that possible?
  7. P

    Standalone ECU Megasquirt- sorting out the details

    Keep this up. Because I think AEM is very expensive right know for me and I have been wanting to do this for a while but I was scared to take the dive. Later
  8. P

    4 Doors Vs. 4 Doors

    The bentley Flying Spur kicks arse. Chevy Impala?:wtf: When did those become fast?
  9. P

    A 1uz-fe - V160 clutch for everyone! We're in business now...

    Are you guys going to be putting out a price list anytime soon? So we can see if it is worth buying a clutch/flywheel combo on ebay and then sending it to the shop or buying it directly from them? Also will you have to provide your own ring gear or there is one thrown in with the clutch and...
  10. P

    SC400 to be faster then 400hp Vette?

    Um I think you are inaccurate with the supercharger putting up more power than the turbo 1UZ's. Excuse me if I am wrong but rdm20fan is putting down 510whp on 18psi and the stock slushbox. I dont see any of the chargers coming close?
  11. P

    Engine Setup

    Been here since 2001 and will be here until 2008. So we can definately meet up. We have to call eaach other up and pm details before I come to germany in the summer to ride the Nuremburg(I know its not spelled right). Hopefully I will have a TT 6spd SC4 crepping around Europe leaving alot of...
  12. P

    Engine Setup

    I am in Aviano. Close to Venice. So I am in the north part. Oh am that polizia lambo is only in the south! So the North cops and there Alfa Romeos will eat my dust!:owned: Maybe we can meet up sometime. Me and my friend head up to germany sometimes for oil!
  13. P

    Engine Setup

    Benn I call feel your pain. I want to go in the direction of destroying all M3's, C5 vettes, Audi S and RS and the occasional ferrari. In Italy you can see them all and its time for my 1UZ to start wrecking havoc. Good Luck and I might see you around. Me and a good friend of mine are planning on...
  14. P

    Pieces of the puzzle for a V160

    Alright fellas I need your help. I need to figure out what pieces to use when trying to swap the SC4 to a V160 6speed. These are the things that are need that I know that are rarely mentioned, And what i Need to know is what car to get them from so I can press ahead for with swap Spigot...
  15. P

    Size of the V160

    Reason for asking is I want to know if I would have to modify my transmission tunnel? This is on a SC400/Soarer? Thanks Fellas
  16. P

    Size of the V160

    Does anyone know if the V160 is the same size physically as the R154 or W58. Because I want to put it in my SC400 without modifying my transmission tunnel on my SC400? Any help is appreciated
  17. P

    Fair price for V8 Turbo manifolds?

    Another thing I forgot to ask is will provisions be made for a external wastegate to bolt straight to the turbo headers or will that be a $50-100 extra option? Depend on the persons setup (i.e, single or twin):veryhappy
  18. P

    Standalone ECU AEM EMS driving UZ's

    So has anyone done this yet? And do you have to takle it to a professional to tune or can you tune it yourself? I am in Italy and i am very sure that no one here runs AEM EMS. Does anyone if there a re tuners in Europe? I am really interested but I have alot of questions about which stand alone...
  19. P

    Fair price for V8 Turbo manifolds?

    A big question that I think you havent said alot about is production? Some one brought this up earlier in the thread. Is it 4-5 sets a week or 2 sets a month? Or make them on demand? And if so how long will production take after a jig is setup? I have more but I will wait:approve: This is very...
  20. P

    Fair price for V8 Turbo manifolds?

    I agree with Lextreme. 600-900 dollars range and you will have buisness. Starting off with a high price will deter some of your potential buyers. Are you going to be producing these any time soon? Like in the next month or so? And to piggyback off of Cribbj what about offering a supercharger...


Back
Top