Search results

The adjustment screws on the top and bottom of the tps, i need to know what size and thead pitch, length ect of these screws... i tried adjusting the tps tonight and the screws were so old and never been touched before they are extremely hard to move and also they are now stripped.. im sure i...

well on my lunch break, i poped out the maf top sensor, and put it back on thinking maybe the seal wasnt good since the problem is intermittent, and you put it in, press it down, then i decided to make sure it was really snug so i pushed down firmly and wiggled it left and right and it popped...

well on my lunch break, i poped out the maf top sensor, and put it back on thinking maybe the seal wasnt good since the problem is intermittent, and you put it in, press it down, then i decided to make sure it was really snug so i pushed down firmly and wiggled it left and right and it popped...

well on my lunch break, i poped out the maf top sensor, and put it back on thinking maybe the seal wasnt good since the problem is intermittent, and you put it in, press it down, then i decided to make sure it was really snug so i pushed down firmly and wiggled it left and right and it popped...

well on my lunch break, i poped out the maf top sensor, and put it back on thinking maybe the seal wasnt good since the problem is intermittent, and you put it in, press it down, then i decided to make sure it was really snug so i pushed down firmly and wiggled it left and right and it popped...

well on my lunch break, i poped out the maf top sensor, and put it back on thinking maybe the seal wasnt good since the problem is intermittent, and you put it in, press it down, then i decided to make sure it was really snug so i pushed down firmly and wiggled it left and right and it popped...

drove it 30 miles to work today, seems to be ok, had a small buck at 67 mph but it wasnt nearly as bad as it was. Under a medium load from dead stops it didnt buck either, even when i was trying to make it it ran ok. Mpg seem to be ok as well right now. I guess i can live with not replacing the...

so after putting about 80-100 miles on it after resetting it and its fine is it safe to say the maf just needed a little airing out and runing through, seems like if it was intermit it would have happened alot soon than 80-100 miles

long story short me and a buddy cleaned the maf, put it in crap a/f cleaned it again, better a/f drove it around ran fine for a day, next day i took it out cleaned it realllly good put it in, reved to 5k and it was normal except for a couple a/f drops at 3k under hard acceleration. next day i...

Will the jdm maf for the 1uz work fine with the usdm 1uz with the usdm ecu?

im stock, just picked up the lex, slowly replacing needed parts before after cat turbo build, but im definitely down to go

http://www.off-road.com/toyota/tech/codes/ These are all the corresponding odb1 main ecu codes, their are a plethora of codes but none listed for the transmission

thanks, i just dont wanna go through the hassel of getting one from ebay and trying to outbid a 100 supra guys for a cheapo part. buti guess ebay it is its so wierd though, you take out the maf and clean it with eletronic cleaner and it stops working properly, but people who douse it with car...

Hey im getting ecu code 31 for my maf sensor after having it out and cleaned with electrical cleaner. Now i'm getting crummy milage and serious bucking from miss read from the maf. I was wonder if their was any place that would rebuild my maf, or if you guys know a cheap place that i can pick a...