Search results

Does anyone out there have one of these units? I have one, though when i was feeding the cable to the Display under the carpet a couple of wires pulled out and i don't know which one goes to what pin hole? If someone out there had one, would they be able to give me the pin# and cable colour...

Rod, Thanks heaps, thats a lot more info than i expected. Do you know if the temp sensors after the cats were not connected, would this effect the mixtures ? Someone has told me they just warn you of increased temp. Someone else told me they do this and also assist in adjusting the mixture...

Does anyone know all the diff's between the two variants of the engine ? eg: Ecu, plenum etc Regards Stephen

Does anyone know? I have been told the Temp sensors after the cats on the sc400 are to monitor the performance of the cat. When the cat gets blocked the temp rises and the sensor activates the warning light on your dash. But is this all it does? somebody further told me it works with the ecu and...

Son Gokou, I am in the same boat, only the drivers side as well. Anyone else ? any assistance please, anyone ? Regards Stephen

LexARSE, To date i have serviced everything on mine myself. But you just never know what will happen ! Send me your business card, who knows one day i may drive up there and have a mechanical prob. With a car like this it's always good to have comfident contacts. Att: Stephen Coff Add...

Blown V8, I have seen the thread you have directed me too. Whilst making adjustments to the timing is one thing, making at VVT-I engine is a totally different ball game. See when somebody says to me VVT-I, I see varible valve timing as in the car manufactures terms. A system that is set to...

Whilst anything is possible and some of the things i see poeple on these site do is astounding. Things like that are a lot more involved than they look. Secondly unless you have the knowledge and tools/ machines available to make the parts yourself, it usually works out cheaper and safer to...

Guy/s, I am in Sydney Ausytralia. I actually live in Bankstown. How about yourself/selves ? Regards Stephen

Guys, I suppose if you already had the stuff lying around that would be one thing. Going out and buying the stuff just for this job, yeecks. That stuff is very pricy and also take into consideration he weight. I made up intake pipe out of mandrel bent exhuast pipe and then wrapped it in...

I have a 94 model SC400. When i press the foot release leaver to fold the seat forward it folds but doesn,t automatically move forward anymore. Has anyone else had this problem and/ or know how to resolve it. Does anyone know what is causing the problem ? Regards Stephen

Has any of you guys out there played with the cam timing ? I was just wondering if anyone had advanced the cam timing a little. Regards Stephen

Thank you, Greatly appreciated Regrards Stephen

Chimpy, I recently need a pair of front shocks for an SC 400 but brought a second hand pair for now. Will be needing a new pair in the future. Could you get me there details so i could find out the direct costs. Regards Stephen

2Bad, Well any brake shop should be able to complete any brake servicing. As for the engine thats a little bit of a different story. What area are you in ? There is a service station in Rushcutters Bay on Bayswater Rd, it's on the right hand side heading towardsEdgecliff. I personally...

Guys, Are the struts the same on the LS 400 as the SC 400 ? Surely they would do both front and back ? Vito.a, Could you assist us with any answers to the above questions ? Rgards Stephen

Lambo, If you could send it to [email protected] that would be greatly appreciated. Lextreme, Thank you very much, doesnt get much more detailed than that. Regards Stephen

Does Anybody Have An Assembly Drawing Of The Hydraulic Compressor Pump For An Sc400/ Soarer. Regards Stephen

Well, I didn't think it could have been much because i have been driving the car like this for the past three and a half years. Are all the heads like that ? My car was brought over direct from Japan and i'm the first owner. Well thats good to hear anyway, thanks heaps. Regards Stephen

Can anyone help me ?? I have a V8 Soarer and last weekend pulled the Inlet manifold off. Looking fom the front of the engine, there is a hole in the back of the manifold/ plenum, right hand side. It's oval shaped with two threaded holes each side. It looks to be part of the polution gear. If...