Search results

Hi All Do you need the brake switch 12v feed connected in to the ECU on the A 19 green / white cable. It looks like its a 12v feed to the ECU when the brakes are applied, it also looks like it is spliced into the feed to the brake lights as well. There are two other wires on the brake switch...

Done it for £30 of $50 all in, Machined off the old adjuster so I could mount a ford Granada manual tensioner to a ally plate, Just to see if it would work I made up a test with a piece of 10mm scrap steel. Will do a nice one when I get some alluminium. I will have to replace the studs or make...

Hi. Not enough room at the side to make it adjustable, only 6 mm clearance between the chassis and the alternator + only 110 mm diameter, 120 amp alternator as space is tight. Alan

Thanks for that

Anybody have any idea how to remove the old tensioner from the engine Alan

Wow £ just for that, will make something to do the job. Many Thanks for the reply Alan

Hi All. Is there a tensioner pulley that works in the opposite way , I only have an alternator, as you can see its a tight fit but a good fit, only prob is no way to tension it with the existing tensioner. Will the spring turn around?, not pulled it off yet , has anybody got a picture of one...

Hi Try these people, best there is for this type of job. http://www.boggbros.co.uk/gallery.html Alan

Hi I also sent an email but not got any reply, I have access to a machine shop with the right machines, just need the drawing / cad file. Alan

Hi Many Thanks for that. Alan

Hi All I have just replaced the fuel regulator and want to know if these can be removed, the middle is the EGR and I think I just need to put a 10k resister in the two wires. Do I need to do anything with the 2 other plugs (if they can be removed). Alan

Hi Sideshow. I will miss your witty banter, most people come on here so they can ask for help and advise to help them out when they get stuck, I bet there has been many people who you have given help to in the past to get them on the road, There will always be people who just want to take...

Smart Ass, as heplfull as a chocolate teapot Alan

Hi Mine works fine, no problems with AV or spam, not many posts on these days, there was a few spam posts on there and not much to do with V8. Alan

Hi All. What is everybody using for the gear indicator when they do not have a ls400 dash. Alan

Hi All, For info, the fittings are 14 X 1.5 they screw in fine. Alan

Hi, I am replacing them with an fittings and flex stainless hoses, Alan

Hi All. what are the fitting on the transmition cooler pipes, they are flared but don't know what they are, I was thinking 18mm X 1,5? just need to replace them. Alan

Hi Are these the 2 items either side of the EGR valve on the manifold and have the small pipes going to the throttle body, do I need to do anything with the plugs. Alan

Hi All. As I understand it the charcoal canister is to do with the gas tank side of things, I have a fully vented fuel tank, can I remove the canister from the engine, if so can somebody post a picture of what I can remove. I have deleted the EGR setup but have not found any ref to the resister...