Search results

Hi Help ! I am wiring up injectors and need to know which two groups of four injectors to fire I am using megasquirt and it has 2 injector outputs so I can run 4 and 4 but which 4 ? the left bank all together ? the right bank all together ? the centre 4 ( 3,5,4,6) all together and the...

which direction does the s2000 engine turn ? I am not sure if all Honda engines are anticlockwise or if this is the exception. I have fitted a 1uzfe to a mazda mx5 so a s2000 should be achievable !

we wish we got the complete package here ! we get the engine - covered in salt water residue / corrosion the harness is sliced off with an angle grinder and I also think we get the"bad" grade from japland - aus / nz gets the "prime" grades we here in South Africa get a lower grade than you guys !

I think I would need 8 channels to fire those ? unless i can pair the trigger from the ecu ? I dont see why this cant be done ? are they for sale ? and what triggers them ? 5 v or 12 v ?

Ok what about Dodge / SRT 4 / Neon coils ? like these ?

heres a quick link to an ebay auction of what is supposed to be a coil with ignitor - that would be really simple to set up - it comes from an old dsm perfect for wasted spark I think...

Hi thanks for the replies Anyone used "DSM" coils ? apparently they good for up 20-25psi boost with no issues - and msd apparently make an upgrade on them as well. apparently they are paired - ie two coils for 4 cylinders - a quick ebay search found a few for under 30 USD so getting two of...

I should mention what the ecu will support up to 4 spark outputs; use with factory coils, distributors, or wasted spark coilpacks; 0 volt points OR 5 volt TTL triggering requires external ignition modules, or coils with built in ignitors does this mean I could run 8 coil on plugs and wire...

Hi I am removing the stock twin dissy setup as I need to buy one coil and two rotors / caps and all leads - my feeling is why not upgrade it will probably be cheaper and have more power potential ! my ecu can handle 4 coils - so wasted spark it is for me what coils can I / should I get ...

Hi we here in SA battle with these conversions compared to the aussies and yanks ! I am using a megasquirt ecu and its going in a Mazda MX5 rear wheel drive cabrio - far race events etc

hi there ! I am also a "saffer" on here ! off the top of my head - there are two boxes - engine ecu and gearbox controller get an aftermarket cruise control system from vdo - easy enough to fit there is a new bunch in Cape Town (capricorn or something like that) claiming to have the...

do you have a wideband ? if not get one then please make yourself up a set of det cans (copper pipe about 10cm long with a flattened end bolted to the engine block, slip some silicone tube over the end of this copper pipe - snug fit is best - run the pipe to the interior of the car without...

a gear puller on tailshaft did the trick a dowel had rusted up badly

I thought those were just to give the spring loading and the lever that feel of firmness - I was looking for a split pin type effort

thanks chris ! now to find this restrict pin......

pics not showing if you are able to please email them to [email protected] thanks !

Hi - I am looking at how to strip the 5mt w58 - anyone have a manual ? or suggestions ? I need to remove the "lever" to extend it that is in the gearbox at the rear and at the top that connects to the shifter ! I dont wanna strip the whole box and have to deal with springs and levers...

I am about to make some mounts as well and would also like to see as many other pics I am also contemplating solid mounts - is this feasible ? or will the vibration be a killer ? the 1uzfe engine is supposed to be "buttery smooth" so this translate into less vibrations...... anyone done solid...

ok thanks I will block it off - but where does other end go to then ? (on the throttle body to the heater hose area ? ) I have got richwood manifold and I tossed my std intake (stupid) I know

trying the attachment again