Search results

Hi Tdcoup , has the car been on a lift recently, if so you must turn off the air suspension with the boot switch before lifting it up. if not all the wheel sensors travel outside their normal range, if the car is up at the max and you press down what happens, if nothing check the fuse in the...

Using Hydraulic fan pump I have been thinking the same to use the fan pump, it puts out a pressure of 171-356 psi and the outlet pipe is about 16mm o/d maybe someone clever could calculate its flow rate, i would think its up to the task. Regards Lambo

hi tdcoup, have you tried turning it off in the boot there is a switch on the passenger side, sounds like the sensors are confused, turn it off, disconnect the car battery for 1/2 hour and retry, will it select low postion, ie release the air from the system, or does the pump start up and then...

Hi Jibbby, As an IT engineer, its a desktop for me, i have lost count of how many clients have lost everything when their notebook drive takes a dive, and it happens alot. If you use a notebook make sure you back it up daily!!!. Notebooks are also not optimized for performance like a well...

Yes thats what it was, i don't know how the link got messed up, that product certainly saves on tubing, hacksaw blades,and a lot of time, Regards Lambo

Sorry guys, go to this page http://edzoldholden.250free.com/links.htm and its the first entry on the links, if you double click it it will down load the file for you to unzip, i did unzip it,it contains a pdf and has some good info. Regards Lambo

I found this, could it be of use to someone http://edzoldholden.250free.com/tufn_auto.zip Regards Lambo

Spotted this on another forum, looks like a good idea.http://www.gt40s.com/forum/showthread.php?t=18293 Regards Lambo

Hi David, Have a read of this it might help get a better handle on what will happen if you loose the valve, on a mitzi its not good when the valve stops working, the idle up when on full lock on the power steer does not happen and they usually stall right in the middle of a 3 point turn on a...

A Very Quick Electric Have a look at this guys is it quick enough 0-100km 3 seconds ,http://www.wrightspeed.com/x1.html and http://www.pluginamerica.com/media/Wrightspeed.wmv Regards lambo

I just filled the tank tonight, $1.709 NZD per liter, and $1.81 for 98, just for 91 that was $109.84NZD, good excuse to stay home and work on the beast lol Lambo

Thanks Kelvin, I probably can get around the Soarer ECU with Manual trans, but i suspect 2 turbo's sucking through the standard AFM would propably overload its range of operation, as i'm using custom headers, that may not be an issue, and the injectors will need increasing regardless what ECU i...

Thanks Peewee, Thought i might have found that pot of gold at the end of the rainbow, have to keep searching for that crown royal saloon. Best Regards Lambo

I have found a replacement ECU with part number 89661-30500 i believe this is from a Crown Majesta can anyone confirm this for me, if it is am i correct that it usually has a separate computer for the Auto, and so could use it with my manual box . my current soarer has the Auto management built...

Thanks Gary, that helps alot, the biggest problem as i see it is the extra flow of twin turbos through the single AFM i'll have to investigate away around that, but it's starting to look like MAp and aftermarket is the way i may have to go. Regards Lambo

Found this site in my travels has some good C/F info http://www.racingcomposites.net/unm Regards Lambo

Dual throttle bodies Hi Guys, Maybe you can answer this one for me, i am toying with doing the twin throttles bodies for twin turbos, i was hoping to use the stock computer with an injector upgrade with maybe a piggyback of some kind, i only want to run 7-8lb boost ,but i figure the flow from 2...

Audi/1uz Hi There, Sound like you need some help, if the 1uz will fit in the space, i think it would the engine bay is a reasonable size.1uz is 690mm long x 700 x700 give or take a bit. I have pulled many Passats/ Audi apart, it will be lighter than the Audi/vw 5 cyl , my project is a...

Air Leak Hi Nick11, Sorry Its not good news i am afraid, the top of the strut has a air tank built into the strut just below the black cover, at the very top under the cover is an actuator this adjusts the firmness of the shock by means of a shaft that goes down the centre of the shock , the...

Thanks guys that helps alot, i started to think they may have been fwd wheels, i can now draw up my suspention geometry etc, i'm trying hard to make room for 4 pot calipers on my project with the smallest or no spacers possiable, at the moment it looks like to get 4wd hubs and 4 pot the only...