Recent content by tsirovy

Done parting out. Sold

I will take pictures of the stereo backlighting.

Yes. I used white leds @ approx ~4volts. Used a resistor on the light emmiting diodes that did not already use a resistor w/ the appropriate application already in the car. The same bulbs were used in the stereo face as were used with the climate control module. However the bulbs behind the...

light emmiting diode I have recently replaced every single light in my car with an led. Changed all lights including stereo lights to all white. People say it could not be done but I found it really really simple about 4/10 difficultly. Just carefully disassemble the face of the stereo and the...

Good info. So I can remove both egr pipes and buy a block plate kit with the three plates, two for the intake and one for the exhaust? Does the engine require that I block off the other openings in the coolant bridge?

This is the best picture of a second generation 1uz-fe, with the split egr pipe, that I can find. Appears even after hundreds of posts we still have knowledge to gain. Anyway. I guess I ask questions when I know the answer to see if you guys like new info or talking about the same old things...

Sounds to me like the sway bar bushings. I had to replace these on my 96 when i first got it. One of the bushings was torn and the sway bar was hitting the frame metal that it goes through, over bumps and had a loose handling feeling.

Is my 1996 ls400 egr pipe the same as the egr pipe in the picture above like the early model ls400 egr pipe, one single unit? Or is my 96 egr pipe divided into two separate pipes like the sc400 engines i have seen before?

Jeremy, it is a matter of stripping and reconnecting the wires.

'A stock Nakamichi receiver is paired with a stock pioneer amp' If the original pioneer receiver does not work and I use my Nakamichi receiver, will this require a Nakamichi amplifier?

Changing the Alternator is what fixed my power steering whining noise. The whole car runs so much better now.

Yes your right. I went ahead and switched the female plug and worked perfect. Thanks

Can an alternator plug be wired from a 1st gen into a 2nd gen ls? in order to use a 1st gen alternator?

Changed solenoids from 1st gen to second generation switching plugs for electrical. seems to be much quieter however I cannot remember how it is supposed to sound. I am in testing phase for now.

Please PM me for faster response about parts, prices, shipping.