Recent content by psiuz

Miwise I just fitted the large rush headers and built my exhaust system. The headers fit real neat are a reasonable price and large ones should be awesome with my blower hope to tune soon. That outboard would be sweet ay. I know a bloke that just bought two 225 hp mercury's cost him $60 000 au...

Thanks Sideshow hope i can do this swap soon

Thanks Guys Sideshow what eng where the diagrams for. I already have a turbo diesel 80 with auto didn't think it had eng ecu thought only connection with auto was the kickdown cable on the fuel pump. Prob wrong though

Bump Is there anyone at all that has put 1uz into 80 series cruiser Man or Auto. Thinking of doing this with the a442f auto.

Has anyone put the mighty 1uz in front of A442F auto (found in the 80series 92-98) if so how do we control it or maybe the A440F (90-92 model). Regards Justin

Do you have cad drawing for these i will be able to let you know if they will fitt 1uz don't know about 3uz.

When I fitted my supercharger i did aproxx 10L flush with the atf and seems to run a little cooler. I have put it in my 80 series TD Auto I pull 3 tonne often and sometimes 7t and after 80000 km just a little brown in colour. If any one else has experience with these oils i'm very interested to...

WDoherty I got in contact with amsoil in the states. Ea034 is 4.7"long 3.02dia and has 7-10 psi bypass. The Ea057 is 3.404"long 2.91diaand 8-10 psi bypass. This was the only real difference. My dealer said internals are the same so just the bypass is different and the 034 is larger capacity. In...

WDoherty What are the part numbers of those filters I'll ask them they seem to answer other things I ask them once I see how they compare in specs to what I am using i might use some. Thanks

Thanks Lex LXSV8 plans to increase the speed of his Raptor V at a later date. If I could attach pic i would it is one beutiful Soarer/SC400

Mudman you are skilled that is an absolutly awesome install. Exctractors like that give a stiff every time. You shouldnt have trouble passing inspection with that baby. WELL DONE

There is a company that hopes to have a standalong soon should retail for about 1500AUD. The stock ecu will be retained for all its uses except the control of engine.

Thanks bro can't seem to get my pics posted hope I can work it out soon. Soarer has some acceleration now which is sooo awesome. Torque at 57kmh or 2850rpm is 492nm love this pulls great from right down here. Will try to run the 1/4 mile soon.

Gday all to bring uptodate I am fitting some lukey ultraflow mufflers in place of the four rear mufflers and fitting some 315cc injectors. Very busy at work but will do tune asap. This system is boosting 9.5- 10psi post few more pics soon

Check out post called [S/Charger on soarer] right here on lextreme