Parts Soarer/SC400 engine bits. Perth Western Australia.

[Detomaso17]

hey mate,
do you still have the wiring loom? i need the complete thing.

 

[Detomaso17]

Set of injectors $200
Set of heads $150
Set of cams $100
Full uncut loom (including front engine loom) $200
Exhaust manifolds $30
Intake manifold $120
Few sets of rotor caps and rotors $80 per set
Various sensors. (Cam, crank, oil temp, water temp etc)
Few sets of aluminium engine mount brackets $50 per set.
Non-Traction control throttle body.
Good set of engine covers/plastics
Cam covers.

Needing to sell stuff ASAP as i'm tripping over things every time I head to the shed!

PM sent BLOWN22

Cheers

hey mate, do u still have the wiring harness??

 

[cuh8er]

Wiring harness sold.
Cheers for the bump though, still have the parts listed in the first post.

 

[cuh8er]

Block sold. Crank sold. Have a good set of early pistons and rods left over though, if anyone wants them.

 

[Detomaso17]

hey mate,
i'm after the fan idler assembly and pulley,
do you still have it?

thanks

 

[cuh8er]

SC400's have a hydraulic fan, not an engine fan.

 

[Detomaso17]

the australian delivered were fan apparently, only the imports
had the hydralic pump. so i been told.
any idea where i can get one from?

 

[Peewee]

There are no australian delivered soarer's.

The LS400 was the only australian delivered 1UZ.

 

[cuh8er]

Oil pump sold.
Water pump sold
Block and crank sold
Heads sold.
Cams sold

This is pretty much what's left. Prices revised.

Set of injectors $100
AFM $100
Intake manifold (upper and lower) $100
Few sets of rotor caps and rotors $50 per set
Various sensors. (Cam, crank, oil temp, water temp etc)
Few sets of aluminium engine mount brackets $35 per set.
Cam covers.
Also have a few good ISCV's

 

[MX73 V8]

Hey dood, dont spose you have a a/c compressor and/or power steering pump hanging around?

 

[cuh8er]

Sorry mate both sold unfortunately....

 

[Matador]

Oil pump sold.
Water pump sold
Block and crank sold
Heads sold.
Cams sold

This is pretty much what's left. Prices revised.

Set of injectors $100
AFM $100
Intake manifold (upper and lower) $100
Few sets of rotor caps and rotors $50 per set
Various sensors. (Cam, crank, oil temp, water temp etc)
Few sets of aluminium engine mount brackets $35 per set.
Cam covers.
Also have a few good ISCV's

I know this is a seriously old thread, but I'm interested in a set of those aluminium engine mount brackets. Are they still available?