Fuel system help in buggy

[ethann]

Good evening all,

Just setting up the fuel system in my buggy and could just do with some info on what to do.

In tank I have 4 walbro pick ups in each corner, then a 044, all running -8an fittings, now the issue I have is what do I with connecting -8 to the engine?

Correct me if I'm wrong but the m12 banjo fitting on the injector rail also has the fuel reg on it? I can't find an m12 banjo to -8 only -4. Could I do away with the banjo fitting and fuel reg an run an external fuel regulator?

Or is the stock fuel reg not where I'm thinking it is?

 

[gloverman]

The Banjo fitting on the fuel inlet has a pulsation dampener on it. The fuel reg is on the outlet located on the other fuel rail if we are talking non VVti engines. The regulator has a vaccuum hose going to it where the dampener has a screw in the middle of the unit.

VVti engines have two dampeners on the back of each fuel rail. Cheers

 

[ethann]

Awesome, thanks for that gloverman.

Cleared up abit, makes much more sense.
Will drop into local speed shop and get some fittings