A650E temp gauge test port

The 1UZFE EGR Delete Kit is available for sale here.

fastegg

Member
Messages
432
Location
Gosford Australia
Is there a 'test port' to put a trans/ fluid temp gauge sensor into ?
... I want to put a trans/fluid temp gauge in... has anybody done this ? Are there any surgestions as to what one to use ?
 
I would like to do that on mine too, engine oil temp and trans temp both.

Engine oil is sorta easy, look at this: http://www.amazon.com/gp/product/B001PLNDF2/ref=ox_sc_act_title_1?ie=UTF8&smid=A3Q5L29ROA0I31

Trans shouldn't be bad, get a t-fitting and put in the cooler lines. I would consider one in the outlet of the trans one and at the inlet. Then you can see cooler efficiency.

Is there a 'test port' to put a trans/ fluid temp gauge sensor into ?
... I want to put a trans/fluid temp gauge in... has anybody done this ? Are there any surgestions as to what one to use ?
 
There is a temp sensor in the pan but tapping into it can cause the ECU to get a different reading due to the multiple pullups involved when the signal goes two ways.
 
http://vdiag.x90x.net/tecu3.html

there's free software available that can read live data via simple k-line interface ($10 chinese cable for VAG-com). works with 1998-2003 models, newer cars require can-bus adapter.

apparently there's a bunch of issues with it...language and the need of tweaking, to name just two. afaik there's no other software around THAT capable. of course there's toyota techstream software, but you normally don't want it to run on your car-pc
 


Top