Search results

Brand new, I ordered for 1uzfe, they sent for 1uz. I can't use em. So 160.00 shipped. obo. these have never been used. I don't have the nuts/washers you will need to get these.

Sold. moderators please close

Brand new Kenne Bell boost a spark (forced induction model) never installed, all wiring and instructions included. 200 shipped

I'm finding that out now! ugh!!:15:

Looking for 98 Lexus GS400 transmission valve body. Needed ASAP.

How can you tell if the VVTi is working properly or if the cam sensors are working? When I start up the car, there is a rattling sound for about 1 second then it goes away. It has always been doing this since I installed my Vipec v88 (linksys G4) It almost sounds like the valves are tapping...

I need to get the stock cam info for a 98 GS400 (1uz VVT-i) Lift Duration lobe center intake opens/closes (usually degree relative to TDC and BDC) Exhaust opens/closes (usually degree relative to BDC and TDC) Thanks

Sorry, my bad, I have a TT'd 1uzfe. Also have a bunch of other stuff on it. That is why the cold plugs.

After rechecking everything, I think I found the reason for the "stumble/shake" at cruising speeds. Looking at all the plugs, I did notice that one plug was extremely foul compared to the others. I decided to change plugs. I used NGK 4554 (v-power heat range 8) as the replacement for the...

the model # is SL4-550 High impedence I don't have pics of it now. I have a pic of it when it on the engine

Have 8 RC 550cc injectors for sale. 620.00 shipped

converted to MAP.

I am not too sure what keeps the engine rpm limited. My understanding is that is a fuel cut on the oem setup. Don't really know if it is reading cam or crank motion to trigger the cut. I currently running a full standalone setup. Initially was running the autronic SM4 but after the rebuild...

My car runs fine throughout. It's just that when I am cruising I start to feel the "stumble/shake" The car runs fine on part throttle and accelerates well. It only happens when the throttle is held in place. I checked my TPS and it is dead on. I used an OBD scan tool and it reads 15.7%...

I have also had the same problem since my rebuild. I still trying to find the cause. I have a "stumble/shake" when the car is cruising at 50 mph at 1500 rpm and on level surface. It will continue if I don't put more throttle and will go away if I tap on the throttle but will come back if I...

your other choice in rods could be Pauter. They have rods built for the 1uz. Excellent stuff. You can definitely get these relatively quickly as they are manufactured in the US.

I am running a fully built tranny by IPT. Check out what they do. Here is a link. http://www.importperformancetrans.com/toyotaauto.shtml If it's not ok to link, you can take it out.

I have a 98 GS400 transmission with an upgraded valve body already installed. Transmission runs perfect. Shifts crisply. did I already mention it has an upgraded Valve body installed. No need for your car to be down while getting a valve body upgrade. Or you can remove it and place it in your...

Wow, That is gonna be interesting to tune. Is the RPM limit gonna be changed? I wonder how much more power you may get by letting this engine rev higher and with a good set of cams and exhaust, that motor will be great! Is the owner gonna get the pistons coated?

Maybe I am getting old, but I would love to have a car like this except I need a car with some practicality. If I could get a car in the supercar territory that is also practical, I would get an Audi RS6 Avant. I can't see any car that is as practical yet carries a can of "whoop a**" for the...