Search results

Neither can i chap and im not exactly a novice. It just seems that everything small to go wrong has. I did take that into consideration and measured that with my vernier when i was having trouble bleeding the clutch and had the gearbox off again. But i though the bracket to hold the slave...

Alright guys, long time no speak. I finally got the car started, turned out to be the NSS not making contact. But i have a problem. I drove the car for the first time and the clutch will only engage right at the bottom of pedal travel. Anything else and its as if im trying to shift without...

Hi guys, been a while ao thought id update you all. The clutch is now bled, the pedal feels good with adequate pressure and all seems well. Only problem iv got is now the engine has no spark. We have power going to the coils but nothing to the plugs! Tried a couple of things but nothings...

Cheers for the feedback and info guys. I did the bench test today and we got pressure behind the slave and it was able to push up under hydraulic pressure so the slave and the system are all good! The only problem i can see if being now is the pedal itself i bought from toyota. Its hard...

Na no spacers, i followed your tutorial. I just dont understand it, its a very simple hydraulic system that just doesnt seem to want to work!

Iv got the entire hydraulic system off the car tonight and am going to test it at work tomorrow. Ill let you know the outcome.

Right, a little sick of this now. I bought a Wilwood 3/4 bore master cylinder and fitted it in place. Connected it all up and me a a friend bled the system again, there's no air in the system but the slave has NO PRESSURE whatsoever, i can push it back on the spline with my hand. This has...

During christmas break i removed the box again to check all the system. Didnt take long to remove everything. We bled the system from the slave outlets and got pressure in the slave. We then opened the bleed nipple to let the slave retract a little so it slides on the spline and re attached...

Interesting. We had a little play with it again yesterday and things do seem to point to the master not sending enough fluid through. I can buy a after market wilwood master like this : http://bit.ly/1cuuVgn with a 3/4 bore. If anyone has any other suggestions of a good master to use...

Hi guys, still having problems with this. Tried a vacuum bleeder kit and it made no difference, it sucked fluid through but the same as manual bleeding, basically mostly air and a little fluid. Also the fluid level in the master cylinder doesn't drop much while bleeding. i also checked with...

Ah thats what that bolt was for! Iv been wondering about that, never thought it would be used for that purpose! Really considerate of you mate cheers! Im using a JZA80 master cylinder as they're apparently the same as a soarer unit and it was easier to source! Also a fair amount of others in...

Alright guys! A while ago i bought a UZZ31 soarer which i planned to cannibalise for another project, but the shell was so good that i decided to just manual this one instead! So i i bought everything off toyotav8.com and everything was going well, until recently. My full build can be...