project sc400
Hey guys I'm going to start my FI project in a few months and I'm going to be using oilless turbo's . It's going to be rear mounted running about 15 to 18 psi. I will be posting a progress report as I move along .
Ok side show , I took the car to tech he hooked up his diagnostic computer nothing, he couldn't read anything . No signal from my ecu, he said that a bad ground could be the problem. I'll keep you guys updated.....
Well I tried switching injectors same thing , I was told to see if the computer was any good by disconnecting my TPS or air flow meter. To see if I got a signal from ecu. Nothing!!!!!!!!
Ok guys here what's happening. The car fowls plugs 3,5,4,6 but is fine on 1,2,7,8 . I put in new plugs no change. So what you think is going on a bad ECU ?
new problem
Ok the car would not start . And if it started it would die in a few sec. Checked the fuel pump which is new , the pump come on when you start but it shut off in a few sec:. Need help.:.
Ok I check the the return line blew it. Back to the tank no obstructions .I also disconnect the return line from the fpr started the car no fuel from fpr side. So you're on the money .
Thanks Bumbapp