Search results

  1. Gonzalo Bravo

    GS430 ecu on LS430 Engine

    Can you run an GS430 ECU in an LS430 engine?
  2. Gonzalo Bravo

    Immo Box

    I have in hands a 1GR FE with external Immo box. I connected all wires that I assume are needed, but ECU did not even blink the security light. Is there something extra to connect to run the Immo Box? I have the original harness, Immo Box, ECU, etc. I leave the key apart to test the imld...
  3. Gonzalo Bravo

    +BM pinout on newer 1UZs

    I got in my hands a 1UZ VVTi that looks the "newer" ones, that has the newer type of coils (like 3UZ, 1GR, etc) and the ecu in the engine bay with the harness leaving the engine at front. Does this ECU use the same pinout of previous ones? (3A590) I have doubts with +BM and Immo plugs...
  4. Gonzalo Bravo

    FPR function on from pin 4/22

    I am installing an 1UZ VVTi but have troubles with the fuel pump relay's control. I like to use the FPR function, where the ECU grounds the Fuel pump relay by to start/cut the fuel pump. (I skip MREL function) I wire the pin 4 in the 22 pins' connector to relay coil , but ECU is no...
  5. Gonzalo Bravo

    2UZ VVTi - Non VVTi year?

    What production year for the Tundras was when starts using the VVTi 2 UZ? How can I recognize one or another?
  6. Gonzalo Bravo

    Immo ECU with matched KEY

    Hi, I am trying to run JDM 1UZ VVTi engine (originally coming with 89661-50450´s ECU) with a LS400 (USDM) 1UZ VVTi´s ECU (89661-3A464) that came with her key, coil and a IS300 amplifier (89783-5310). I Pluged the 5 amplifier´s wires as per attached diagram, place the key in to the coils and...
  7. Gonzalo Bravo

    Immo symptom

    What happens when you run an immobilized engine? Does it starts and stops??? Did not starts??? Starts and stops and did not starts again??? Thanks
  8. Gonzalo Bravo

    1UZ FE runs & die. Video

    Hi again I am trying to make run a JDM 1UZ FE second generation. Specs are: Ecu plugs: 34/22/16/28 Ecu N#: 89661-50241 B/R wire feed EFI and W wire feed sensors. The engine starts, but when should down revs and continue in idle, it stops. With or without MAF the problem remain the same Enough...
  9. Gonzalo Bravo

    Body Loom pinout

    Hi Can not find the engine loom to body loom 26 pin connector for a ~96 Jdm 1UZ FE. The Ecu is a 34/22/16/28. This is the body loom connector, that does not match with colors in the 80/40 ecu.
  10. Gonzalo Bravo

    1uzfe non vvti compression

    Cant find in the forum. So, what is the manufacturer compression pressure of a 1 uzfe (out of crown magesta)?. Mine has around 210.


Top