Search results

For your notice the block was made by bensons one of the best sleevers in the usa. Ill try to make a custom gasket 99mm

what about a custom gasket 99mm bore ?

Its a n/a engine with 11:1 compression and stroked up to 5.4 liter so what your advice then

Yes there is burning marks around gasket bore and the heat will extend to other places and make it crack

I Have a custom 98 mm bore (ductile iron sleeve) 3uzfe 11:1 compression. i used the stock toyota gasket and it cracked and failed . then i used a the cometic 98mm bore with .040 thikness and it also failed. the question is if i make a custom gasket how big should be the bore so that it wont...

welcome to the tundra world. if its trd flashed then this problem cannot be solved.

i have finished my long waiting project but i still need some magic touches i have a problem regarding torque vs hp i have made 932 hp and 655 amount of torque which is kind of wierd on a v8 i see supras making 1000hp with 980 amount of torque and its just a inline 6

it happend to me long time before.. good luck anyways

David im waiting for you to finish also .. how long will your project take longer?

dyno sheet its not 2.2 bar it is @ 2 bar

dyno sheet btw the max hp is 932hp@7000 rpm something went wrong with the reading

the motec shows that there is problem with the battery thanks for the advice ill try tommorow and see how it will go

well the cdi 8 and the msb coils are installed no problem with spark.. my problem is the voltage will suddenly drop and cause car to jerk.. the higher the rpm the more it will do that.. i checked my alternator its ok..how can i fix this voltage problem

nop i got springs installed.. somtimes before it hit maximum boost it starts to jerk even

i have a twin turbo 2uzfe twin turbonetic hp72 turbos 0.58 a/r motec m800 + motec cdi 8 ignition system + 8 msd coils installed made 904 hp at 1.8 bar boost from the first program but i have faced a problem the car starts to lose electric.. it kinda want to shuto off the car starts...

whats the rev limit for a 2uzfe engine before the oil pump fails i wana stay safe.. already got cams installed etc.. is it ok to go to 7k rpm ?

what turbos are these ?

Umm turbos not installed yet waiting for them to reach by the end of this week

i have installed a standalone ecu the tempreature was ok during programing but after i went back home and started the car again it went up to 85c what possibilities are there.. cause the temp never increased during tunning..

c00ol upload them plz :)