Search results

Hi just seeing if anybody in New Zealand has got any spare valve shims .I neen at least 1 @2.85 mm thick .the rest I can surface grind to size . Cheers Neil

you will proberbly more improvement with a grounding kit

I will be running link g3 with paired injection and wastespark for the 40 pickup.Just don't like distributors.If you go for vvti chances are it will have security key so there will be probs there.

just put the old one on to some ali and draw around .it's nothing major

I saw this at a swapmeet last week .Besides the fact that it is a real shoehorn job to get this motor in there (1954ish ford pop) I was looking at the flow on the radiator.It in one side of the top tank , flows down through half the cores ,then throught the bottom tank ,up through other half of...

If you have the later 95on 1uz that is an interferance motor

I thought the capri was pommy

I use code shark. Just manually punch in g code .Helps to have good drawings to work off though.

Just a couple off pics off how intake is coming along.I have started making new fuel rails as the old ones will not fit and I don't want to modify the cast ones I have

Hi welcome to the site ,good to see someone with a similar project to mine,(I am doing a 40 pic em up).Sorry can't help with the info but someone here will be able to help.Cheer Neil

that would be really good if you can.

these came from post98 1uz, same as on vitz.tried a goggle but nothing

Anybody know what wires on these coils are the power and earth wire and which is the sigal.And what is the switching voltage.Part #90919-02228

those TBs on custom lower intake ,headers and porting would be a good starting point to get some good power

just a thought about starter motor,have a think about subaru one as they have plenty off power and will fit in buy gearbox and spin the rite way.

Thanks for the replys guys , thats info sounds food .These coils look to be off a good size and lifting them out off the cover will help keep them a little cooler.The motor won't be a high rpm one.The only mods will be a exhaust headers ,custom lower intake manifold (similar to Justins but...

had to take more photos on different camera setting

I was going to upload some pics of what I was thinking thinking off but for some reason I can't get them to upload.The coils I aws thinking off are denso 90919-02228 wired in pairs on an alloy cover with short leads to the plug . The coil look like a COP but have a removable extetion down to plug.

What are you using and what is available that are esay to get a hold off in New Zealand .Preferably coils with inbuilt ingiters . Cheers Neil.

Looking at one that has never been used.Seem to see a few like that ,people buy them then don't get around to finishing project.