Search results

Sounds to me like its the wrong way as in the fish bracket set up it would be the other way round.

Thanks for sorting it, im having general problems posting it might be my browser. Whats your opinions on the graphs? . . open to all The real kick in the butt comes at 5k to 6k rpm on the road, right at the top its hard to deply on the road and keep off the limiter, so im thinking of running a...

http://www.youtube.com/watch?feature=player_detailpage&v=AUp5UJlJ2Is

<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid50.photobucket.com%2Falbums%2Ff336%2FH7ERO%2Fsupronthedyno.mp4">

Cheers for the advice guys ,I didnt have time to do anything other than fill up with some 97ron and fit my fuel pressure guage. Im very Happy with the result it seems very healthy for the set up. To clarify : Vortech supercharger (unknown model) Fish bracket, 6 rib belt, Vortech FMU 12 ...

Booked for a power run tomorrow wish me luck! And let me know anything to check? Iv got a fuel pressure guage but cant decide weather to fit it . . I shoud to see what it is with the FMU,

Electric fan is Gen 3 RX7 a very powerful 2 stage fan . . relativley lightweight too

Also got the flange for the dump valve fitted, and went arround systematically sealing any possible boost leaks, (why doesnt this forum recognise when i start a new line, it makes my posts look all retarded)

It was 293 without the charger fitted. Picked up a Vortech Super FMU today . . A very lucky find in the uk secondhand, It must have been fate! Can anyone shed any light on the Rising Rate ratio to use? It came with a full disc and ring set so I can make it whatever

293bhp everyone was surprised including the operator, is a second gen engine with 200k miles on it, not a VVTI Must be just healthy, it has shorty headers a clear exhaust and air filter. The fish bracket does flex somewhat, I think il brace it. Im not sure on the limits of a 6 rib set up...

oil return drain, made from some sensor already in the sump I wasnt using Its Mounted and spinning now well, oil feed and return sorted, belt aligned and tensioned, and even a filter sorted . . BFI anyone? Random pic of the car after I cleaned it for the first time since owning it.

ANY HELP ADVICE AND TIPS APPRECIATED! also please escuse my posting technique im malcoordinated at english and forums

Mounting spacers for the charger, I made up on my lathe, had to get them down to about 86mm in the end With the charger mounted, I had a pack of 0.2mm shims to get it level with stright edge, very hard to measure acuratly, so we will see how the belts fare

Fitting the Fish bracket, the lower two bolts need a 2mm spacer (as acuratly i could measure with an engineers square and feeler guage) behind them to make it flush, the right side coil needs to be moved to the side of the engine, and one of the distributer wires re routed, or it would eb...

Finally iv got some time to post up on here, Heres the quick lowdown, the car is a 95 supra, I use mainly for drifting, circuit, and natrually macking a nuicance of my self on the public road Engine is 1uzfe from a second generation Ls400, with some shorty headers (unknown brand) a self made y...

hi there, nice neat install!, I have a question did you have to modify the inner arch tub to make clearance for the fish bracket? im fitting a vortech using the fish bracket into a jza80 (1uz powered) and even with some hammer time the bracket is fouling the arch badly, i think im going to...