Search results

Cheers Beato,it is the very last thing apart from the airbox and snorkel to makeup..MmmMmm will have to do some research then..:wall:

Thanks Beato,I've just fixed the rear lsd pinion seal+the power steering pump leak i had..zzz only thing now let to do is the sump..as far as baffles...shouldn't the standard sump be ok if I just keep the volume the same?This is what i'm thinking..when i cut away the side that needs to go and...

Bit of an update..I continue to forget to get the camera out when it's outside..LOL now I've dropped the oil for the sump to be mod'd due to articulation of front axle..(Beato may as well do this as he will later..)I put the bump stops on and the measurement left meant that I would smash the...

here's a pic..enjoy the expression..hehe:arms:

Splice along side the black wire on top ignitor(it has 1 extra wire then the bottm one..)..I tryed the wire that came from the cluster side on the loom and the signal is very weak..use the signal off the ignitor and you should be all set..thats what i used..cheers

Bit of a update,Have been driving around with rego,warrant(still have 1 month before it runs out and then i have to cert..)2nd gear is where all the fun is..LOL and when you get it all happening on the road it sits around 2.3-400 rpm @100kmph..not too bad..doesn't pull hard when in toip though...

As title says..is there anyone/way i can upload these for everyone..I had some lazer cut and they fit just spot on..Just i can't seem to upload the file extention..:cool2:

Bit of an update..the exhaust has been done..2 1/"4"primary's into a 2 1/2"main:privateeye: ..single exhaust and it's sounds amazing:nana: ..all i can say really..real nice low rumble from idle(you can hardly tell it's even running)to about 1500 rpm then the tone changes from that to a real nice...

Cebby I have the dwg for these..just need to upload it(just got some made) these are the tri flanges that come off the headers..will try upload it..hope this helps..bar It won't..wrong extention..can i email someone with these to put the website..?

Thanks 91, my insperation came from Cebby:bling: and the fact that i've always wanted to put a 1UZ into a project:firedevil: ..I'll have to post up a pic once it's finished at the spakies and exhaust guys..and it does look pretty good now..also it drives amazingly as I had to drive it about 8...

Trucks in getting the few little things i couldn't get done..done + exhaust which is wednesday..once back i'll draw up a simple diagram..also i have the cad dwg for the factory exhaust manufold flange..seems it's not around so i'll upload it for everyone to use..:smoker: hope this helps..cheers

Well abit of an update,I've changed wheel size from 34"x10.5"x16 to 33"x 12.5"x 15's and there is a maked difference in height..the 15's are about 1"higher then the 16's...go figure..LOL but at last it's looking as I'd hoped for:firedevil: ..will get a pic later today..cheers everyone..

Bit of an update,just had the cert guy around and is saying it's all good..just need the exhaust and a few electrics finished along with the new tires I've got(33" x 12.5 x 15 superswampers now for winch challenge rules) cheers..will post up a pic or two when cert'd..(or finished which will be...

what part number from dellows is your bell housing and spacer adaptor..?just for reference for others and If i need to change bell housing later on,i know this will work 100% without any horsing around..cheers

off trademe..it cost $400 and works well in the garage but will see when i get her really humming..here's the link to the usa site and they do export.. http://www.tanksinc.com/index.cfm/page/ptype=results_w/mode=cat_directory/home.htm hope this helps..cheers Keri

Crickey ****,I would have gone round and said you fit it..with my bat..LOL..I can understand how some things just take ages to get right..will be waiting for some pics..you're an artist and love watching one at work..cheers..from over the ditch..:sgrin: and yes you did win the netball:261...

If you have a can do attitude then give it a go you'reself(Is the only way of learning..)...I just bought a fuse holder from repco and some generic relays(30 amp) and then just wired it up..:banana: :banana:

What i'll do is make a diagram that shows the how to hook up the relays and corresponding wires..(that I used anyway) so It should make for a easy install..all in all there are only about 9-13 wires that need any power and feeds and your set..will post up later..cheers:slomo:

My understanding is the ecu takes care of the cold start injector..It's all in the way you setup the relays and who gets the first signal and then corresponding signals from there..best I can describe it..LOL:biggthumpup: I'm sure sideshow or gloverman will help out..they're good at what they...

Bit of an update...Had all the wiring hanging off the truck for easy diagnosis and it ran beautifully ounce wired up:bling: , I then started to move the components into the cabin area and thats when the fun started..LOL...:zx11pissed: All i can say is make sure you earth EVERYTHING...LOL It made...