Search results

Item: Full 1uz to w58 gearbox conversion kit from Bullet Cars Location: Kingston/Hobart Item Condition: Used but good condition Reason for selling: I'm parting with this because going with a different gearbox and kit Price and price conditions: $1000 Extra Info: Includes: Bellhousing...

Hey mate, I have one for sale and I'm in Hobart aswell. http://lextreme.com/forums/showthread.php?p=109692#post109692 PM me if you're interested. Anthony

Item: Remote Oil Filter for 1UZ Location: Kingston/Hobart TAS Item Condition: good Reason for selling: i've upgraded Price and price conditions: Offers.. Extra Info: Includes the brass fittings, 400psi hose, hose clamps. Also shown in picture Pictures:

bump. I still need these if anyone can help

Need a 1UZ bellhousing for r154... and/or r154 gearbox. Replacing a W55 (with issues) and W5x bellhousing I anyone wants to trade..

I think bullet cars have them off the shelf

They're QA1 coilovers. You can get them from macdonald bros racing in Australia. http://www.mcdonaldbrosracing.com.au They don't just bolt in, there's alot of custom chassis work in there (4 months working on it every night after work and weekends). check my build...

Pic of 91 2wd hilux with 28mm sway bar (guessing a petrol one, I didn't know they where different)

I was talking to one of the guys (Greg or Tom) at Bullet a couple of weeks ago about these intercooler (as I'm interest in using one once my HTV1900 setup is complete). They said when dynoing a car on a 35degree day the intake temp was only reading 40degrees. Impressive.. but when I thought...

Ok so many hours on the dyno, had/have some issues to fix.. - ECU not setup correct when dynoing ages ago - Running too hot (need a low temp termostat, maybe) - not enough fuel on the power runs (need a new Bosch 044) so can't rev any higher till replaced - New Plazmaman TB not sealing so it's...

I've been doing a bit of searching and can't find where to source a low temp thermostat. Does anyone know where to get one? I think 'Sideshow' had one in his, TRD one if I remember correctly. I tried ring the local toyota dealership.. no help at all. Also, does the standard thermostat open at...

My rotors and caps look pretty dodgy too but they work fine. You can get new ones from Bullet Cars at a decent price. http://bulletcars.com/parts-services/engine-parts/1uz/ I had a similar problem a while ago where I had fuel pressure but my injectors weren't pulsing. The power wire to the...

Millsi did a single turbo one http://lextreme.com/forums/showthread.php?t=6548 Wouldn't mind knowing how it all ended up....

With the idle control, I got sick of the never ending issues with the standard ISCV. I installed and cable controled dial for idle speed. It's standard in the 4wd models and connects directly to the accelerator pedal. I think it's meant to be used so farmers can get out of the 4wd while it's...

Now some pics of what I did with the cam cover breather and new Plazmaman TB.. Pulled out both breathers, drilled out the restrictor in one and for the one the passenger side (in OZ), used the press fitting on the standard TB and cut off the hole that sits on the bottom of the standard TB...

Thanks, All the mod and fab were done myself apart from the welding. Got a mate to do that who's qualified. Here's a pic of the sump when I made it ages ago to fit the engine quite far back and clear steering

Cool, thought that might be the case. I'll be getting into this today!

ok, so the bigger the better. Thanks How bout removing/reattaching the splash guard in the cam cover?

I have decided to move my cam cover outlets to the front out of the way of everything else happening back there but I have a few questions: 1. Do people remove the splash guard in the cam cover to do the alloy work? 2. If so, what's the best way to remove and reattached? 3. What size...

I'm fairly sure he's got what he needs already