Search results

As above for the 1UZ engine, one of mine snapped whilst removing the loom. Thanks Ben

Does it go into O/d or not? Check the o/d pin in the wiring loom goes to ground when the switch is enabled. Assuming it still revs cleanly to the limiter in lower gears? 4.2krpm on the supra tach is 6800k on the motor, should stop there. Idle should show at about 400rpm on your tach, of...

Scott, I've tried calling but not got a response, give me a call and I'll talk you through removing the limiter. How did you wire up the O/D switch? I hadn't got that far when I left your place. Do you have an ABS warning light on? Does the VSS signal from the ABS sensor on the box get...

Doesn't he just. I can't help but feel he's also slightly illiterate too. For the record, my car has been up and running for nearly two years now. Thanks to whoever uploaded this though, I'm sure it will help many people in the future.

Blimey, don't let sideshow see this, he'll be wanting it removed, people couldn't possibly do this themselves! :p.

Pistons + Rods Aftermarket please, ideally low compression. Also after ACL bearing sets, and ARP bolts. All items need to be shipped to the UK. Cheers

I'm amazed it has taken you so long to reply. It is rather amusing (for me anyway) that you can call me like that with absolutely no idea as to what my profession is, nor what qualifications I have. One this is for sure though, you have absolutely no grasp of the English language, spelling...

Isn't it about time you so called "auto electricians" actually gave some decent and helpful information out to members of the forum instead of always trying to line your own pockets? Forgive me for thinking this was a place people came for help, not somewhere you can knock people back who are...

There's a speed sensor on the box, that feeds the dash + ecu for a speed signal.

As above please. I'm in the UK.

as above, in northumberland, uk. Good condition, comes with converter and flywheel. £100.

For sale or swaps are: Torque Converter Gutted Cats, EGR Valve + all pipes Auto Transmission (1uz) Auto Bellhousing (1uz) Exhaust manifolds (1uz) Parts I require are: Alternator Maf sensor and intake pipe (between sensor and manifold) N/S engine mount.

Will give that a shot. Thanks guys.

So am I right in saying +12v to all the black yellow , black red and black orange; And ground all brown + white and black wires? Assuming then its just a case of +12 to the starter relay to crank it over?

I have. I've spent the last 3 days looking for one on here :D. I find quite a few references to a diagram by the user lextreme, when you click the link its not attached to the post anymore. I just need to know which wires (bare minimum) need connecting for the thing to fire up. I'm unable...

I've been trying to find the basic wiring for the above. Its about to go into a Supra however I want to fire it up on the engine stand first. Does anyone have a basic wiring diagram to get this fired up? Thanks in advance. Ben