Search results

Hi Ended up with Celica 2006 model no 90919-02238 from a 2ZZ-GE, like the plate idea and the coils twisted. Alan

Hi All Got my cop's, I tried one today, fit ok but the plug socket touches the rocker cover, not wanting to machine and weld the rockers, the option is to make a sleeve to extend the cop so it is 6mm above the rocker cover and make a bracket to secure all 4 each side. SO what's the best way to...

Thanks for that The SC430 coils I was looking at pencil coils X 8, my LS400 has 2 coils and 8 plug leads so I am doing a full change to pencil coils. Alan

Thanks for that, I did read that the LS430 coils are better for turbo but need to be extended, sounds a bit of a faf, don't know on this if it's a option for a better coil Alan

Hi I need to get some cop's, I have 2 part numbers both Denso, one is 0919-02238 and the other is 90919-02230. I don't know which people are using so any body using either of them. Thanks Alan

Hi Mine has a mod on the back to drive the dry sump pump, std one a bit thin to sleve a pulley on, Ross was 4mm larger on the od. Alan

Hi I had not until now, been away from the car with house repairs, computer been down as well. Thats very good news will give him a bell to see if he wants to put some things on the web, I will be sorting mine out over the next few weeks, I don't know how he feels about the people who got...

Balancer Hi Are there other balancers in the Toyota range that fit the LS400 1994/5 engine. Alan

Hi All Got a Balancer last year when I was in Aussy, some toe rag has been in my workshop and taker a few bits, balancer water pump, gasket set and pr of turbos. Replaced all except the balancer, would cost lots of cash to get another Ross one sent over, looking for a balancer in the UK or the...

They make this for the Vauxhall Monza, Senator so if you give them the drawing they could do one for the Lexus to your joint. Alan

Hi I think these guys make what you are after, they make some, just give them your bolt spacings. http://www.blueprint-eng.co.uk/ Alan

Hi All Easy to beef up your gearbox mount, not sure about welding, nut and bolt man, made mine out of titanium, The prop shaft guy lent me a flange so I could mark up the holes, Landy's use a 4 bolt flange, I used a heavy duty 6 bolt one, I have 3 X M10 holding the support plate and are...

Hi I made this adaptor, it bolts up to the gearbox output and the drive shaft just bolts to it. Alan

Well done, share your thoughts and pictures with us on Spitronic Forums @ http://alanwhitaker.forumchitchat.com/, just started the sote Alan

Hi All There is still a section of Performance parts still active, you can click on add to cart and it takes you to pay by Pay-Pall. For anybody who is un aware they will be charged for these items and may not get them. Should not the whole page of Performance Parts be removed from the site so...

Hi Been down with flue for the last 2 weeks, will be looking at this Alan

Mine is in a TVR S Alan

At the shop being cut, should pick it up next week with the lower flange, have 2 sets of Hayabusa 1000r5 throttle bodys so next weel should be able to look at this starting this project. Alan

Hi Yes I have seen that, good idea Alan

Hi I have not installed it as I have a few other things to do first. Spoken to Spitronics and should I be adding some new pages to the forum. I think for the money it's a good alternative to some of the more expensive ECU's, It's set up for the None VVTI and there is a set up for the VVTI...