Search results

what it looks like now I hear what you are saying about thye araldite getting soft but I think it will be ok it is only an intake runner and it is suspended well above the block I went over it with JB weld to make it stronger It is an interferance fit any way here is a pic of what it...

the end result heres what it ended up looking like from below and above

Two words ? does that mean araldite is bad or perhaps you like the taste please explain this nonsensical post

I solved the problem I drilled a 3/16 hole in one of the runners and araldited a piece of beake line tube in then just a simple piece of rubber line feeds the vac to the release valve The actual fuel return that's a different story with some gentle rebending I can get it to run under the...

I need some help on this link ecu wiring The crank sensor and cam trigger cables are black and grey sheiled cables In the inside of these cables there are 2 conductors and a shield the link manual says to use one of the conductors and the shield ? whats the other conductor for ? Is...

half a lexus Ok but I am not using the factory ECU ( link) nor am I using the factory throttle bodies I have 8 and no vacumn (sp?) port to plump it into not using the o2 sensors either What does it need will vac from one runner do ?

Do I have to have one ? It would make life so much easier if I could delete it somehow I have used the original Crown in tank fuel pump in my swap and have just started plumbing and wiring the engine It occurs it would save me a lot of hassle if I could do without the return line

I deleted all the pullys and now use the alternator to tension the belt remounted the alternator up one hole and remade the lower bracket Deleted the thing that looks like a waterpump but isn't and made a fibreglass cover for where it was will do the same for the tensioner pully panel

8 holes on top I have a 8 throttle body setup on mine have yet to get it running there is pictures in the stack thread hiding further down and in the 1uzfe in a 32ford hotrod link where ever that is hiding now I visted Tony last night and I think his setup is better and certainly a better...