Search results

  1. A

    will an oil cooler plumb in here??

    Originally 4.7 Alloy, (Good in it's day, but that was a quarter of a century ago.) I looked at the "T"s but can't see how I could use it to get oil out- and back. Is one high pressure and one lower pressure, [/QUOTE} Won't know if one is high pressure /low untill I start it, I might do...
  2. A

    will an oil cooler plumb in here??

    3uz engine, (pic below) can an oil cooler plumb into the two allen keyed plugs?? (I know-I have a busted transmitter on the end. ) searched the forum, only mention was a sort of unanswered post here http://www.lextreme.com/forums/showthread.php?t=2349&highlight=oil+cooler
  3. A

    Wanted Wanted 1UZFE Aircon compressor

    I have a one from 3UZ , (same block ,2002 4.3 Lexus-got to be 10 years younger than most of whats on offer) has bracket,and free condensor, should bolt straight up, In Leichhardt, welcome to have a look. $150 the lot.
  4. A

    Trade Swap, My mid sump, for your front sump.(Sydney)..

    Rear Soarer sump sold, still have the mid, swap if you are local, sell if you are not.
  5. A

    Trade mid sump for rear sump

    If you can't find one closer, I have a rear(Soarer)you can have for $120.Don't want to trade as I have a mid on the shelf as well.
  6. A

    Trade Swap, My mid sump, for your front sump.(Sydney)..

    Cancel this post,Still have the 2 mid/rear(whatever you want to call them)Have the 3UZ sump back as it fouled the crossmember of the car it was going into, Pity, as the front sump I swapped it for, now being returned,:06: fitted perfectly for me. them's the breaks. Front sump still wanted.:15:
  7. A

    Trade Swap, My mid sump, for your front sump.(Sydney)..

    Swapped the 3UZ for a front, still have the Soarer,If it helps anyone out, will swap for a spare front if someone close is stuck with the wrong one.
  8. A

    Wanted 1uz front sump wanted (Sydney)

    Got one, thanks to BLOWN22. Delete thread.
  9. A

    Wanted 1uz front sump wanted (Sydney)

    still wanting one of these, buy , or trade, now have choice of two sumps to swap, the 3UZ and a 1UZ (Soarer) pictures on my post in the trade section http://www.lextreme.com/forums/showthread.php?t=12257
  10. A

    Trade Swap, My mid sump, for your front sump.(Sydney)..

    Now with choice of 2 sumps, Early 1990's Soarer, or 2002 LS430. They do interchange, only difference is the 4 bolt holes arrowed on the LS400 are 8mm . Probably don't even require a sleeve. Looks like could be ideal for tight installation, sump holds 4.5 litres (without filter) Pick one any...
  11. A

    Trade Swap, My mid sump, for your front sump.(Sydney)..

    In Sydney, urgently need a front sump for UZ. prefer Sydney-or close pick-up. (I originally wanted just to buy one outright, but didn't have any luck) now have an early 1990's Soarer mid sump to trade.Complete, pan, girdle,windage, pick up, Want the same, but with the sump on the front end. This...
  12. A

    Wanted 1uz front sump wanted (Sydney)

    Staying auto(5 speed) the rear sump will be a real tight fit against my firewall, front will move engine forward about 4 inches.Wanted to put the sump in there for an eyeball before I made up my mind as to which way to go, so would prefer to buy a front for the time being, and sell on the one I...
  13. A

    Wanted 1uz front sump wanted (Sydney)

    Not at the moment, not sure which one I will use,need to see how the front sump works with front crossmember,If you have one lying about that I can test fit, will be able to make instant decision. Also the rear I have is off a 3UZ, Has a smaller pan, great for tight clearance installations...
  14. A

    Wanted 1uz front sump wanted (Sydney)

    Wanted 1UZ front sump with the works to go.(Everything, Pick up, windage, ,alloy girdle, pan, etc) Prefer pick up Sydney, or close.
  15. A

    Trade 3UZ mount brackets swap for 1UZ(SYDNEY)

    Picture of brackets off the engine here. http://www.flickr.com/photos/21084918@N08/3672965857/
  16. A

    Trade 3UZ mount brackets swap for 1UZ(SYDNEY)

    Alloy brackets , probably have mounting about as far back as possible , pic here- http://www.flickr.com/photos/21084918@N08/3630844146/in/set-72157619761146204/ swap for 1UZ that will hopefully get my mount point as far forward as possible. Really need them to bolt to front 4 mount points...
  17. A

    3UZ into 928 Porsche

    Transaxle/auto (Wow,3 speed!)25 years old ,regardles of who built it , things have moved on a little bit in this time,(and I'm not interested in overhauling one of them) Great looking car, The idea is to drag it screaming into the 21st century, I have been through it with engineer,(my 4th car...
  18. A

    3UZ into 928 Porsche

    I've wanted one of these cars since the day I first saw one nearly 30 years ago, Problem was, as usual, they cost too much. They started getting into my price range (read cheap) a few years ago, only problem was time had not been kind to most of them. Engine repairs/replacement and parts prices...
  19. A

    porsche 924s/944 1uzfe...

    Im doing a 3UZ into a 928 at the moment, just passing the point of no return,:scool: Engine, torque tube and transaxle have allready been ebayed, will be cutting out the floor and puting in a tunnel that will accommodate the 5 speed auto, ( Toyota engine and auto are lighter than the Porsche...
  20. A

    1uz sump on 3uz ???

    Thanks Jim, I can now post, Just checked the spreadsheet, Which says 3UZ,1UZ sump compatable, So where do I need to use the 8mm drill?


Back
Top