Search results

  1. O

    Parts Complete tundra 2UZ engine and harness

    how much shipped to 35210 al business address
  2. O

    Parts Lexus V-8 with Transmission wired and ready to go.

    what would shipping to birmingham al 35210 business address cost?
  3. O

    Parts 2jz block and head fs

    i have a block out of an 01 gs300. it needs some machine work because it dropped a valve and ruined the piston and rod. the cyl walls have some minor scrateches on them in that cyl the rest are ok. i also have the bare vvti head but the compustion chamber will need to be welded and rebuilt...
  4. O

    Parts 92 Ls400 Parting Out

    afm, igniter, throttle body?
  5. O

    1uz stroke vs 2uz stroke?

    i finally found that out on my own, but thanks though. i am using a 1uz block, rods, and pistons, and a 2uz crank. i will ahve to have my piston tops machined down.
  6. O

    Best Of Uzfe Mix-n-match

    those are 2uz specs not from either source.
  7. O

    1uz stroke vs 2uz stroke?

    are they diiferent i heard it was greater on the 2uz but havent found it in writing anywhere?
  8. O

    Best Of Uzfe Mix-n-match

    i also have specs for 2uz and 3uz but ill have to post them later
  9. O

    Best Of Uzfe Mix-n-match

    Crankshaft (cont’d) Main bearing center wall thickness (Reference) No. 1 and No. 5 Mark 3 4 5 6 7 Others Mark 1 2 3 4 5 Crank pin diameter Circle runout Maximum Main journal taper and out–of–round Maximum Crank pin taper and out–of–round Maximum 2.481 – 2.484 mm (0.0977 – 0.0978 in.) 2.484 –...
  10. O

    Best Of Uzfe Mix-n-match

    Cylinder block Cylinder head surface warpage Maximum Cylinder bore diameter STD STD Mark 1 2 3 Maximum STD O/S 050 Main bearing cap bolt tension portion diameter STD Minimum 0.07 mm (0.0028 in.) 94.002 – 94.010 mm (3.7009 – 3.7012 in.) 94.010 – 94.023 mm (3.7012 – 3.7017 in.) 94.023 – 94.031 mm...
  11. O

    Best Of Uzfe Mix-n-match

    Cylinder head Warpage Maximum Valve seat Refacing angle Contacting angle Contacting width Valve guide bushing bore diameter STD O/S 0.05 Cylinder head bolt thread inside diameter STD Minimum Protrusion height Intake Exhaust 0.10 mm (0.039 in.) 30°, 45°, 60° 45° 1.0 – 1.4 mm (0.039 – 0.055 in.)...
  12. O

    Best Of Uzfe Mix-n-match

    this may end up jumbled but ill gve it a try SS0OQ–07 – SERVICE SPECIFICATIONS ENGINE MECHANICAL (2UZ–FE) SS–9 186 Author: Date: 2003 TOYOTA TUNDRA (RM956U) ENGINE MECHANICAL (2UZ–FE) SERVICE DATA Compression pressure at 250 rpm STD Minimum Difference of pressure between each cylinder 1,324...
  13. O

    Best Of Uzfe Mix-n-match

    i can tell you that the 1uz rods are much beefier than the 2uz rods. also that valves are bigger in the 1uz head than the 2uz. i have some very specific numbers that i can post later. joey
View older results


Back
Top