Search results

  1. 1

    Rides

    Thankyou Lex. Regards, Matt.
  2. 1

    Rides

    What happened to the member's rides area. Regards, Matt.
  3. 1

    Extractors for BMW340i

    I have a scanner at last. Some photos from about 2 years ago! Extractors I made using the original crown exhaust flanges. They seem to work OK, I dynoed 216hp/161kw with stock crown ecu. Regards Matt. Sorry if this is ment to be in the exhaust forum.
  4. 1

    BMW 340i Results

    I have finally scanned and edited the dyno sheet and the 1/4 mile results. This is a stock crown V8 with custom extractors and a K&N filter. I love that flat torque curve, the 216 hp converts to 161 kw for those metric people. Regards Matt.
  5. 1

    Crown ECU

    That is good to know Peewee. What would be a realistic power output with a decently tuned stand alone, currently I have 161kw @ the wheels. Also views on what stand alone is best in relation to sensor compatibilty, qualility, tuneability, cost. I noticed KDog recommends Autronic, Motec and...
  6. 1

    Crown ECU

    Thanks heaps for the responses Peewee and KDog. I was sort of guessing that I will have to go stand alone ECU one day. I would love a little more power, but I love the driveability I currently have. Regards Matt.
  7. 1

    Crown ECU

    Has anyone modified or piggybacked a crown ecu? Regards Matt.
  8. 1

    1000+hp 1UZ in drag rail!!!!

    T_Terror. I will go and have another visit with these guys and see what else they are keen to tell. Matt.
  9. 1

    1000+hp 1UZ in drag rail!!!!

    I have seen this rail and have talked to the guys who built it. It was all built in house and is an awsome piece of engineering. The block is a work of art! I personally think it is still a 1UZ as it is still the same capacity and it looks unmistakeably like a 1UZ. They have even adapted the...
  10. 1

    POLL - Your Dyno & 1/4mile times

    Car - 1977 E21 BMW 320 Weight - 1320 kg Engine - Crown 1UZ FE Engine Mods - Custom extractors/ K&N pod filter. Gearbox - 5 speed supra box Rear end - 3.46 LSD Dyno HP/Kw 216/161 rear wheel 1/4 Mile Time/Speed 13.9 @ 99 mph at Kwinana motorplex WA.
  11. 1

    how do I find faults on 1uz transplant?

    Hi there Yarno, I had a similar problem with my 131 conversion. I had failed to connect the black/pink ignition wire at position 2 on the 22 pin plug. With this wire not connected everything else functioned normally but I couldn't get it to go into fault mode. Check it out, hopefully this...
  12. 1

    Bmw E36 1uz?

    Viking325i I think you should definately do it, an e36 with a blown 1UZ is a dream car for me. The e36 is one of the best handling bmws, the 1UZ would make it an awsome rig and like you mentioned it does fit. My e21/1UZ has been a great conversion, I have smoked heaps of expensive cars and it...
  13. 1

    Question for those running CRS's manual bellhousing (mine's Supra/Coaster)

    I used the original square boot and made a small plate to cover the gap. Matt.
  14. 1

    What is your Age?

    33, married this year in January. No kids yet.
  15. 1

    Ideal cruising revs??

    I did some measurements and calculations and I must have a W57. My rolling distance is 1872mm or 0.001872km. Done by marking a wheel and rolling one rev then used a tape measure. I divided 110kmh by 0.001872 to get wheel revs per hour @110kmh = 58760.7 Multiplied this by the diff ratio...
  16. 1

    Ideal cruising revs??

    Good point Peewee I am not 100% that it is a w58, I think it does about 3000 rpm @ 100 in 4th. What are the overdrive ratios of the w55, w57and w58? Cheers Matt
  17. 1

    Ideal cruising revs??

    Must be an error in the tacho. I have never run the numbers, which I now intend to do. Thanks for that Peewee. Regards Matt.
  18. 1

    Ideal cruising revs??

    I'm running a 3.15 diff with 225/45/16 tyres in my 1300kg BMW. With a w58 Supra box in 5th, I am doing 2700 RPM @ 110Kmh and getting about 10.5 Litres/ 100Km. Still pulls hard at that speed in 5th. Regards Matt.
  19. 1

    Engine check light/8820km with a 1UZFE

    Thanks guys, sideshow, I have conected up a 12v globe as you suggest and it does not come on with ignition on/engine not running ie just before start up as you would expect. But I will try bridging e1 and te1 with the light connected. What do you mean by a led test light? Do you mean I need a...
  20. 1

    Engine check light/8820km with a 1UZFE

    Thanks for the ideas guys. Peewee I cleaned the TB and Idle valve (which was covered with black soot) with carb cleaner, and it has smoothed out alot. Zuffen do you have any idea why these check light's don't work? Does the K Dog know? I would be stoked to get it going! I would feel...


Back
Top